O-Ring Package Trim / Tilt O-ring Kit-Outboard 0174003
Last update: 36 days ago Update Now View Secondary Warehouses
|In Stock||In Stock||Unavailable||In Stock|
This product is not being produced anymore however may still be available through other dealers.
Last search: 36 days ago Update Now
No searched locations carry this part.
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
Johnson 115 hp V4
- Repair Difficulty
- Repair Time
- 1 to 2 hours
Problem fixed: Trim lift mechanism stopped working and all bolts and caps were frozen in place.
Lift cylinder was easy to disassemble and repair, but the bolts holding the lift/tilt mechanism broke off in the cylinder housing and necessitated additional work to the tilt/trim frame. Once we were able to remove this assembly then we could tackle the trim cylinders. The top caps that needed a spanner wrench (that we didn't have and had to fabricate one from an old wrench and some drift pins) were frozen in place and very hard to spin off. This took the majority of the repair time. Reassembly and installation and bleeding were easy (once we found the correct information on the WEB).
Product Fitment Grid
This guide is to be used as a reference only. You must verify fitment using your model or serial number.
Customers Also purchased
Manifold O-Ring Kit
Shock absorber Bushing, lower
Trim Cylinder Quad Ring
Trim Rod Seal
Trim Rod Wiper
|O-Ring Package VIEWING THIS PRODUCT||0174003||CURRENT|