LockWasher, port 0302290
- Guaranteed fitment for 36 different models
- This is an OEM part manufactured by Evinrude & Johnson, OMC
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Description
Product Questions
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
12 Product Reviews
70hp evinrude
- Repair Difficulty
- Hard
- Repair Time
- More than 4 hours
Problem fixed: Scored cylinder walls
Stripped block down had bored 30 over and installed new piston and rings. Updated a few other things while it was apart.
Evinrude 175
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: Shift linkage and lever broke off
Pain in the neck shift linkage, had to cut it out and order parts through local marine store. But was getting excuse after excuse as to why my part wasn’t here. Ordered from Crowley Marina and had my parts in just a few days.
Evinrude loop V6 250HP
- Repair Difficulty
- lProfessional
- Repair Time
- More than 4 hours
Problem fixed: New cylinder sleeves and pistons.
Changing power head from open deck to closed deck. Rebuild in accordance with ORM service manual. Parts purchased from Crowley Marine and Marine Engine.
Evinrude etec 135ho
- Repair Difficulty
- Hard
- Repair Time
- 1 to 2 hours
Problem fixed: Shight linkage bolt sieze and broken off. could not remove shift rod from linkage under engine cowling. Require to remove lower unit.
Replacing water pump. shift linkage bolt seized and broke off head. Could not remove lower unit unless this linkage bolt is removed. Drilled linked coupler and bolt with large (sharp) lit until just before reaching shifting rod. Then used dremel tool with metal cutting bit to surgically remove remaining metal around shift linkage and shifting rod taking care not to damage shifting rod from lower unit. Replace all parts and bolts with purchased from Crowley Marine which were an exact match with no issues.
OMC stern drive 1977 electric sift
- Repair Difficulty
- Medium
- Repair Time
- More than 4 hours
Problem fixed: Stern drive leaked oil from water inlet
After changing oil at spring I noticed that there was leaking oil from water inlet tube and that oil level in upper part housing had dropped. So after reading repair manual and looking trough explosion pictures of upper housing I concluded that there must be problem somewhere in the sealings. Only problem was that its next to impossible to find parts for OMC in Finland. After little searching i found Crowley Marine. Using of web store was really easy and parts arrived to Finland in less than a week. Mean while i had opened the upper housing and located the leak in to o-ring between gearhousing and main housing. When parts arrived work was relatively easy. While I had the whole upper housing opened. I also changed water pump and all the other sealings as well. Whole time it took was about 5 hour. Plus Removing and installing the sterndrive from the boat took about 2 ours each.
Product Fitment Grid
This guide is to be used as a reference only. You must verify fitment using your model or serial number.
BRAND | MODEL | 1983 | 1984 | 1985 | 1986 | 1992 | 1993 | 1994 | 1995 | 1996 |
---|---|---|---|---|---|---|---|---|---|---|
Outboard | 100 | - | x | x | - | - | - | - | - | - |
Outboard | 110 | - | - | - | x | - | - | - | - | - |
Outboard | 115 | - | x | x | - | - | - | - | - | - |
Outboard | 120 | - | - | x | - | - | - | - | - | - |
Outboard | 140 | - | x | x | - | - | - | - | - | - |
Outboard | 150 | - | x | x | - | - | - | - | - | - |
Outboard | 155 | - | x | x | - | - | - | - | - | - |
Outboard | 175 | - | - | x | - | - | - | - | - | - |
Outboard | 185 | - | x | x | - | x | x | x | - | - |
Outboard | 20 | - | - | x | x | - | - | - | - | - |
Outboard | 200 | - | - | - | - | x | x | x | x | x |
Outboard | 225 | - | - | - | - | x | x | x | x | x |
Outboard | 235 | - | x | x | - | - | - | - | - | - |
Outboard | 25 | - | x | x | x | - | - | - | - | - |
Outboard | 275 | - | - | x | - | - | - | - | - | - |
Outboard | 30 | - | x | x | - | - | - | - | - | - |
Outboard | 35 | x | x | - | - | - | - | - | - | - |
Outboard | 40 | - | x | x | - | - | - | - | - | - |
Outboard | 50 | - | x | x | - | - | - | - | - | - |
Outboard | 6 | - | x | - | - | - | - | - | - | - |
Outboard | 60 | - | x | x | - | - | - | - | - | - |
Outboard | 65 | - | - | x | x | - | - | - | - | - |
Outboard | 70 | - | x | x | - | - | - | - | - | - |
Outboard | 75 | - | x | x | - | - | - | - | - | - |
Outboard | 8 | - | x | - | - | - | - | - | - | - |
Outboard | 90 | - | x | x | x | - | - | - | - | - |
Sea Drive | 1.6L | - | x | - | - | - | - | - | - | - |
Sea Drive | 1.6L - Hydraulic - XL | - | - | x | - | - | - | - | - | - |
Sea Drive | 1.6L - Mechanical - XL | - | - | x | - | - | - | - | - | - |
Sea Drive | 2.5L | - | x | - | - | - | - | - | - | - |
Sea Drive | 2.5L - Hydraulic - XL | - | - | x | - | - | - | - | - | - |
Sea Drive | 2.5L - Mechanical - XL | - | - | x | - | - | - | - | - | - |
Sea Drive | 2.6L | - | x | - | - | - | - | - | - | - |
Sea Drive | 2.6L - Hydraulic | - | - | - | x | - | - | - | - | - |
Sea Drive | 2.6L - Hydraulic - XL | - | - | x | - | - | - | - | - | - |
Sea Drive | 2.6L Ducted | - | x | - | - | - | - | - | - | - |
Customers Also purchased

Bushing
0351299Cap
0352430
Exhaust tube to extension LONG SHAFT MODELS Screw
0306503
Screw
0331025
Screw
0328695
Seal
0324937
Shift Lever Pin
0327590
Shift rod Lever
0335191Supersession Chain
Name | SKU | Superceding SKU |
---|---|---|
LockWasher, port VIEWING THIS PRODUCT | 0302290 | CURRENT |
Lock Washer | 0328736 | 0302290 |
LOCK WASHER | 0778230 | 0302290 |
Washer (Screw) | 0338307 | 0302290 |
Aftermarket Product Interchange
Name | SKU | Price | Brand |
---|---|---|---|
Lockwasher (Min. Qty 2) | 21492 | $0.78 | GLM Marine |