Neutral Start Switch 0389265
Last update: 8 days ago Update Now View Secondary Warehouses
| WHS1 | WHS2 | WHS3 | WHS4 |
|---|---|---|---|
| In Stock | In Stock | Unavailable | In Stock |
This product is not being produced anymore however may still be available through other dealers.
Last search: 8 days ago Update Now
No searched locations carry this part.
- This is an OEM part manufactured by Johnson/Evinrude, OMC
- Flat rate shipping starting at $3.95
- 30 day return policy
Product Questions
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
Problem fixed: motor would not start.
removed motor control box from side of console. removed retaining screws and removed throttle arm with a hex key. open control box, it splits in half. located and removed neutral safety switch that had two small screws holding it.removed wires going to it one at a time and placed them in same position on new switch. than I screwed new switch in place and put control box back togather as it came apart. pretty simple and straight forward.
Johnson 90hp
- Repair Difficulty
- Medium
- Repair Time
- 30 to 60 mins
Problem fixed: Engine starting without key id battery connected
Removed and opened shift control, replaced switch, reassembled
- Repair Difficulty
- Hard
- Repair Time
- 2 to 4 hours
Problem fixed: Rebuilding a Bass Buddy pontoon boat and "helper" broke the neutral safety switch.
Too long to type
225 johnson
Johnson 90 hp
1978 Johnson 140 h.p.
Johnson GT 150
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: Engine would not start and run
Removed remote control, replaced kill switch, ignition switch and neutral safety switch.
Old Johnson v6 150
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Remote buzzer fault
Removed and replaced Neutral switch : key switch and alarm buzzer
