flat $4.95 shipping
My Account
Order Status
Crowley Marine: serving boaters for over 50 years
Parts in stock Most parts in stock Same day fulfillment
$4.95 shipping on all orders*
Low Price Guarantee
9.6 Pilot logo
0My cart

Select Your Engine:

Spark Linkage Socket 0395448

Satisfaction rating 5 out of 5 (64 Ratings)
$9.95
You save $0.54. (5%) $10.49
5+ IN STOCK Ships Immediately
  • Guaranteed fitment for 46 different models
  • This is an OEM part manufactured by Evinrude & Johnson, OMC
  • Flat rate shipping starting at $4.95
  • 30 day return policy

Product Description

Bombardier factory part. Search for more factory parts & parts diagrams.

Product Questions

There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.

64 Product Reviews

1987 48 HP Evenrude

Repair Difficulty
Easy
Repair Time
Less than 30 mins
by

Problem fixed: Engine would not start

Once I determined that the issue was that the limiter on the engine had disengaged (slipped out of the rubber grommets holding it in place) I just needed to find replacement grommets. The Crowley Marine web site was easy to navigate and find the needed parts by looking at the parts diagram and then clicking the part needed to add to the cart. Shipping to Canada was not an issue and parts were received more quickly than estimated by Crowley Marine. I would order from Crowley again in the future.

Excellent. Good price on hard to find parts.
by

1977 Evinrude 55hp

Repair Difficulty
Medium
Repair Time
1 to 2 hours
by

Problem fixed: Sheared flywheel key, broken linkage socket

While rebuilding the motor I found the flywheel key was sheared and I broke a linkage socket.

johnson 150

by

Johnson 88 Special

Repair Difficulty
Medium
Repair Time
30 to 60 mins
by

Problem fixed: Ignition timing rod falls out

In order to make the job easier(installing the grommet that holds the ball on the timing rod can be a bear) I removed the flywheel. This makes the job much easier.

👍
by

by

Fast delivery!
by

by

1968 Johnson 55 Hp

Repair Difficulty
Easy
Repair Time
Less than 30 mins
Thanks for the quick response and shipment of the parts I needed. I have purchased from you before with the same great service. Thanks again!
by

Problem fixed: Engine bogging while accelerating

Engine idles fine but when throttles open, engine would slowly rev up. Upon inspection found that timing plate had approx., 3/8" slack on linkage connecting it to throttle. Both plastic keepers were missing pieces. Removed and replaced with new keepers. Engine runs great, timing is now in sinc with throttle. Pieces were east to replace using small screwdriver.

by

Great experience. Delivered timely and in good condition. Part as described and worked great.
by

Evinrude 90 hp

Repair Difficulty
Easy
Repair Time
Less than 30 mins
Great service, received product in a very timely manner. Define tilt be back.
by

Problem fixed: Stator linkage not working properly.

Easy fix once I found problem. Removed the faulty keeper and linkage ball and replaced it with the new. Was back on the water.

Johnson 70hp/J70TLCEM

Repair Difficulty
Medium
Repair Time
Less than 30 mins
Excellent! Got what I needed in a very timely manner and will be ordering again.
by

Problem fixed: Spark Advance not working

Received parts quickly and installed. Couldn't have been easier.

by

Order was correct delivered on time great experience
by

by

Wonderful and I always well shop here.
by

Johnson 200 horsepower

Repair Difficulty
Easy
Repair Time
Less than 30 mins
I paid the extra shipping and received it within 3 to 5 business days!
by

Problem fixed: Timing linkage needed attaching

Pulled off the flywheel and re-connected the sensor to the timing linkage.

Great buying experience! I Will definitely be buying again
by

johnson 40 hp 1987 model

Repair Difficulty
Medium
Repair Time
More than 4 hours
orders were processed quick and shipped as soon as i placed them. I ordered parts for a 33 year old motor and they were all in stock.
by

Problem fixed: low compression/ only running on one cylinder

running poorly, compression was low on the top cylinder, pulled head and inspected cylinders to find bad head gasket, thermostat seemed to be junk, i believe the motor overheated and blew head gasket. cylinders looked ok. replaced head gasket and thermostat. Running good now. MORAL to the story...change your thermostats once in a while.

by

1982 Evinrude 70 HP

Repair Difficulty
Medium
Repair Time
Less than 30 mins
Ordering was easy, and shipping was better than I expected. Not the first time I have bought parts from Crowley. Just the fact that they have these older parts makes Crowley the go-to for older boat motors and other parts. Easy to find, easy to order, right away shipping - what more is ever needed?
by

Problem fixed: Spark advance connector broken.

A brass rod connects the spark advance on both ends with the use of plastic, two-piece connectors. One finally gave up the ghost after 37 years, and I lost all spark advance. Went online - Crowley had it in stock. I ordered two - it is an updated part, still a two-piece, and was a little difficult to install. Once installed, it works as it should, and I have spark advance again.

Repair Difficulty
Easy
Repair Time
Less than 30 mins
great
by

Johnson 60

Repair Difficulty
Easy
Repair Time
Less than 30 mins
by

Problem fixed: Spark advance lever fell off

Three of the four parts needed were available, but the fourth was not. I jury rigged a device that works half assed, but shame on Johnson for not supporting its engines!

J 70 TLEC

Repair Difficulty
Medium
Repair Time
2 to 4 hours
I ordered from Crowly and an item was missing. Which i added over the phone some time after i shopped that morning. They immediately expedited my item(fuel ties) the very day I called, no questions asked. They mostly always have the parts i need for my 20 year 70 Johnson with excellent shipping.
by

Problem fixed: New Timing Base and Stator

Flywheel was severly stuck. Surprised about that for my very clean engine. The puller kept creeping ever so slowly. Then popped! Went up about 2 feet and came down on the transom! Luckily no damage done to the magnets. Old timing and stator removed. Installed the kill wire, an then installed the base and stator, routed the wires, plugged them in put back on the flywheel and torqued down the 1 and 5/16 nut. You need a 3/4” drive. She started right up. Timing is a PITA to do on this motor, but will be done.

Johnson 88special

Always a pleasure doing business with Crowley fast, friendly and affordable!
by

1977 Evinrude 55 hp

Repair Difficulty
Easy
Repair Time
Less than 30 mins
I couldn’t believe they would have this part. It was a smooth fast transaction. I’ll definitely use this store again!
by

Problem fixed: Broken plastic spark advance ball joint.

The old plastic was brittle and fell out. The new piece snap back in place with ease.

by

by

Yamaha

Repair Difficulty
lProfessional
Repair Time
More than 4 hours
by

Problem fixed: Low compression

Reprinted a 235 Evinrude outboard and revealed .

Evinrude 55hp model 55973a

Repair Difficulty
Medium
Repair Time
More than 4 hours
Parts arrived in allotted time,prices for parts were reasonable. The only issue would be that parts could be sent in a more compact package possibly reducing postal costs
by

Problem fixed: Recondition ing

Reconditioning of everything except powerhead

Great, quick shipping, website up to date. Will use them again
by

by

Evinrude 70 1994

Easy and very Fast !!!
by

1979 85 hp johnson

Repair Difficulty
Medium
Repair Time
1 to 2 hours
excellent. knew what I wanted, very knowledgeable, got right to the point and completed the order.
by

Problem fixed: spark advance rod ball socket broke causing rod to disconnect.

actual repair was easy. time and work was the flywheel, Stator, and advance had to be removed to get at the place to install the ball socket. I took a dog chain and hooked it to one of the manual start rope hooks on the flywheel. Bolted the other end to the lifting hook on the block..rotated the flywheel to tightened the chain. After much persuasion the fly wheel came off. Made the installation reassembled everything. Motor runs fine All the time is getting to the thing to make the repair. Just takes patience and time.

Great website easy to find stuff good selection and prices. International delivery costs and time are really good and excellent at sorting out any problems
by

by

1984 Johnson 70

Repair Difficulty
Medium
Repair Time
Less than 30 mins
by

Johnson 70hp

Repair Difficulty
Easy
Repair Time
Less than 30 mins
by

Problem fixed: Replacement cover for electrical

Replaced cover with 2 screws. Very easy

Evinrude

Repair Difficulty
Easy
Repair Time
Less than 30 mins
Great. I needed an order modification so I called and talked to a real person who changed my order. Got the parts 2 days later.
by

Problem fixed: Broke plastic timing control rod joint

I popped in the new plastic ball joint and it worked good.

Fast shipping and good parts
by

70 hp Johnson 3 Cylinder

Repair Difficulty
Medium
Repair Time
2 to 4 hours
I have dealt with Crowley Marine before....I am a return customer....Need I say More???
by

Problem fixed: Ignition Timing and Carburetor sync out of tolerance

Pulled flywheel, used valve lapping compound to cleanup the crankshaft and Magneto taper, installed new OEM key. Torqued flywheel nut to 105 inch lbs, installed new linkage pivots for timing advance rod, set the timing to 19 degrees advance @ full throttle, adjusted engine idle speed and carb sync. Installed a tattle tail for visual water pump function, Applied lubriplate type grease to prop shaft, installed new thermostat and water pump impeller, and numerous other tune up items. Tools used : Torque wrench, flywheel puller, compression gauge, Fluke 89 Meter (testing charging system) water earmuffs, Timing light ( Timing was set with spark plugs removed and grounded using the starter motor with control cables disconnected...This old 1974 Johnson Performs well.

Great
by

Evinrude 70 hp

by

Evinrude 200hp outboard

Excellent turn around time. We ordered parts online. They were delivered quickly and accurately. We were very impressed and will definitely be ordering again.
by

Evinrude 55 hp

Repair Difficulty
Easy
Repair Time
Less than 30 mins
by

Problem fixed: Battery power running down

My battery would not stay charged , I found a broken wire on the rectifier which I didn't realize what it was until I did some research quick fix

Great
by

I got what I ordered on time and with a smile... What more can I say? Would/Will buy again! Most pleasant experience...
by

by

Johnson 110 hr

Repair Difficulty
Easy
Repair Time
Less than 30 mins
Excellent
by

Problem fixed: parts

Parts

Fast Service and fair shipping pricing
by

1986 225 hp OMC

Repair Difficulty
Medium
Repair Time
30 to 60 mins
Excellent, service,is fast and prices are competitive.
by

1994 Johnson 70

by

by

by

1987 Johnson 55 HP two stroke.

Repair Difficulty
Medium
Repair Time
1 to 2 hours
I have only good reference with your company.
by

by

Johnson 115

by

by

Johnson 185

Repair Difficulty
Hard
Repair Time
More than 4 hours
No problem, got the parts I needed for my 1985 V-6 Johnson.
by

Problem fixed: Bad compression, overheating

Big job. Stripped EVERYTHING off the powerhead, removed, crated, shipped for rebuild, reinstalled. Almost done. Good thing I'm retired!

Great, package came on time with the correct parts!!!!
by

by

Excellent. We are very satisfied.
by

Product Fitment Grid

This guide is to be used as a reference only. You must verify fitment using your model or serial number.

Customers Also purchased

Supersession Chain

SKU Superceding SKU
Spark Linkage Socket VIEWING THIS PRODUCT 0395448 CURRENT
Linkage Socket 0313700 0395448
KIT AY, JOINT 0765565 0395448
Socket Linkage Ball 0313703 0395448