Crowley Marine: serving boaters for over 40 years Crowley Marine: serving boaters for over 40 years
Parts in stock Most parts in stock Same day fulfillment
$3.95 shipping on all orders*
Low Price Guarantee
9.6 Pilot logo
0My cart

Gasket 0303615

Satisfaction rating 5 out of 5 (43 Ratings)
$3.95
Save $0.14 (3%)
5+ IN STOCK Ships Immediately

This product will be cross shipped from one of our secondary warehouses. Please note the additional handling time.

Last update: 6 days ago Update Now

  • This is an OEM part manufactured by Johnson/Evinrude, OMC
  • Flat rate shipping starting at $3.95
  • 30 day return policy

Product Description

Bombardier factory part. Search for more factory parts & parts diagrams.

Product Questions

There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.

by

Got items I ordered fast!
by

Johnson 10hp

Fast delivery. Perfect fit. Quality at good price.
by

90hp Evinrude

Repair Difficulty
Medium
Repair Time
More than 4 hours
Excellent with exception of longer than expected replay/core refund. It has been close to 5 weeks since I sent off the used core. Besides that, I’ll buy from Crowley again!
by

Problem fixed: Replace power head including water pump etc

If ordering a rebuild power head, order the 4 bottom alignment studs too. They don’t come with head. Remove/scrape off coating at ground wire connector bolt surfaces.

1985 Evirude 8 HP

Repair Difficulty
Easy
Repair Time
Less than 30 mins
Quick and efficient
by

Problem fixed: Gas issue

Easy fix

They had all the parts I needed for my Johnson 6 hp received parts quickly thanks
by

Evinrude 25hp

Repair Difficulty
Easy
Repair Time
Less than 30 mins
Excellent support staff. Fast delivery .
by

Problem fixed: Fuel pump failed on my 1973 Evinrude

Removed old fuel pump and gasket, installed new fuel pump and gasket .

Johnson 4hp Seahorse

Repair Difficulty
Easy
Repair Time
Less than 30 mins
by

Problem fixed: Needed a fuel pump

It is very difficult to get parts for older marine motors in Canada.I also own a lake boat with OMC motor and Sterndrive,which is extremely hard to get parts for.I had to only talk with a representative from your store and in just moments had my part on it's way to me by mail.I will definately have Crowley Marine added to my list of suppliers and will not hesitate in spreading the good word about their awesome help.Thank you very much Crowley Marine,now my two little Grand Daughters can enjoy many hours of fun fishing with their Grandpa:)

1975 - 25hp Evinrude

Repair Difficulty
Easy
Repair Time
Less than 30 mins
As described. Very fast service. Highly recommend.
by

Problem fixed: Fuel dripping out of fuel pump.

- Removed motor cover - Removed two bolts on the old fuel pump. - Removed old fuel line clips. - Removed old fuel pump. - Attached fuel hoses to new pump. - Attached two new fuel line clips (tie wraps) - Tightened two fuel pump bolts (screws) - Reattached motor cover. Done!

Evinrude 6hp - 50th Anniversary Edition

Repair Difficulty
Medium
Repair Time
Less than 30 mins
Great service. Prompt delivery of parts.
by

Problem fixed: Spitting and Spluttering

Own a older Evinrude 6hp - 50th Anniversary Edition motor. It's tried and true. Last year it began to have issues with starting and maintaining power. It was taken to a shop and temporarily fixed but soon had same issue. I felt the issue was lack of fuel. Found the Crowley Marine website. Quickly located the hard to find diaphragm and mounting gaskets for the simple fuel pump which is mounted on the side of the cylinders. Crowley Marine promptly delivered parts. 15 minutes with a screwdriver and now the Evinrude is happy and purring like it should. Much thanks to Crowley Marine.

I do like your website dbut your shipping is a little expensive. So I itdon't order everything I need from you guys. But I do get the right stuff
by

9.5 johnson

Repair Difficulty
Medium
Repair Time
1 to 2 hours
by

Problem fixed: No fuel or igntion

I purchase a carb rebuild kit, fuel pump, water pump kit , points and condensers. The motor runs great now!

Phenomenal customer service. Best I’ve had through online shopping
by

Outstanding service!!
by

verall I was pleased. Orders shipped fast. The only thing keeping me from rating it five stars was my contact with customer service. They simply referred me to the exploded drawings and could provide no help beyond that/
by

Excellent customer service. I ordered a fuel pump that was out of stock. They told me it was on backorder and would take a couple of weeks. But they did say, they would ship the balance of my order w/o the pump. They even looked on line to find out sources for the pump if I wouldn't to order through a different vendor.
by

1979 Evenrude 15hp

A little slow shipping but other than that it was good. Parts were correct and of good quality.1979 Evenrude
by

by

Old Evinrude 9.9

Repair Difficulty
Easy
Repair Time
Less than 30 mins
by

Problem fixed: Fuel leek

Engine started but failed to keep running. I found the fuel pump intake to be cracked. I used the part from another engine but lost the filter and screw from the first so I needed to replace three parts. Crowley had them all at a good price.

Good customer SVC, quick shipping
by

Great
by

Johnson 9.5HP

Repair Difficulty
Easy
Repair Time
Less than 30 mins
by

Problem fixed: Sputtering, variable speed, like running with low gas

New fuel pump. Easy install.

Evinrude 25 HP

Repair Difficulty
Easy
Repair Time
Less than 30 mins
AWSOME , Kept me up dated all the way to the front porch all parts correct no complaints from me :)
by

Problem fixed: Leaking fuel pump

Just had a cracked fuel pump filter housing ,Was great to spend only Penny's to fix rather than having to buy a complete pump for $$$

It is amazing that CM still has even rare parts in stock. All I could get from them was in perfect condition. They will bring my Johno 9.5 (1964) back to life! Shipping to Europe could not have been easier.Thank you very much! Andreas from Germany
by

Evidence 6hp

by

Excellent Service and Prompt Delivery to Australia, You Cant get much better. Thankyou.
by

Johnson 9.9 Model 9R 73B (1973)

Repair Difficulty
Hard
Repair Time
More than 4 hours
No problems, arrived quickly and was accurate
by

Problem fixed: Motor had been stored for over 30 years, would not stay running

Replaced spark plugs, Impeller, checked and adjusted points and did a complete carb rebuild. Motor cranked and ran on 2nd. pull.

by

Best customer service in this industry. Order processed and shipped next day. Buy from these guys. Great pricing.
by

johnson 4hp

Repair Difficulty
Medium
Repair Time
2 to 4 hours
excellent, very easy to find correct parts.
by

Problem fixed: water pump r&r

complete tune up and water pump assy . r & r

by

20 hp evinrude and 9.9 johnson

Repair Difficulty
Easy
Repair Time
Less than 30 mins
very nice thank
by

Problem fixed: for gaz pump repair seal now it s ok

replace gasket and inlet gaz the stock was very efficient thank

1970 Johnson 9.5 Hp outboard motor

Repair Difficulty
Easy
Repair Time
Less than 30 mins
I found the service to be excellent and was pleased that they had the part needed for my 1970 Johnson outboard motor since parts are becoming more difficult to find for it. Part was delivered promptly even though it had to be shipped to Canada! Thank you Crowley Marine!
by

Problem fixed: Motor was not receiving sufficient fuel to keep it running

The performance of my Johnson 9.5 Hp outboard continued to deteriorate from an occasional stall to the point where it would only run for a minute or two after priming and starting. I suspected that the problem was a faulty fuel pump. After disassembling the old pump I realized doing a rebuild would be difficult and therefore elected to seek a full replacement. After searching online and thinking that perhaps I would not find a replacement, I was delighted to find that Crowley Marine still had the part! It arrived in good time and was easily installed in minutes. The motor now runs better than it has in years!

johnson 116

Super fast shipping-part I neededwas completely accurate. Will definitely do business with the company again.
by

Johnson 9.5hp

Repair Difficulty
Medium
Repair Time
30 to 60 mins
Great selection, excellent documentation.
by

Problem fixed: fuel pump leak

Replace gaskets.

AOK.
by

evvinrude 1979 6 hk

Just very fine nice shop
by

by

fast delivery and have many oem Items for my old boat engine,I would buy from this store again when needed.
by

by

Johnson 25L76

Great, quick ship
by

Johnson 4 HP 4R71D

Repair Difficulty
Medium
Repair Time
More than 4 hours
Awesome. I find the site fairly well designed and have no trouble in finding the correct parts for my aging Johnson 4 HP. Delivery was prompt and direct and sometimes I get a tracking number as well. Great work guys and gals.
by

Problem fixed: Motor conks out at full throttle under load. Smokey.

I suspected a fuel problem from the start. Research available motors and cost. On the basis of weight (35 lbs) ad replacement costs, decide to ascertain whether motor is worth fixing. 1)I did a compression test to rule out the motor being too old and worn to be worthwhile repairing. It tested at 100 lbs + or - 10 % and from reading article on the internet and prior experience, I reckoned this to be good for a motor this age (43 years old). 2)I also checked the ignition. The points were fine and the coils tested OK. The condensors, however, were a bit suspect. They read out of range and had some leakage in each. 3) Decided to replace condensors and complete fuel system including reeds. a) I fish in a small boat in a large bay area and so need a reliable motor. b) 4) Searched for parts. Crowley Marine seemed to have consistently good prices. Bought fuel lines and clamps locally. Repaired fuel tank lines and replaced O ring at engine connector - damaged and worn. Also, engine fuel connection on motor worn. Replace. Important to have an air tight seal for vacuum system to work efficiently. Test. a) Motor still fails under load once heated up. - Condensors faulty? b) Check and clean water pump and replace impeller. Clean and polish all surfaces. Check gear case oil retainer. Replace driveshaft O ring and grommet on water feed. 5) Order fuel pump kit and rebuild and fit new screen etc. 6) Replace aging fuel line on motor. Order carburetor kit, Clean all passages and fit kit. 7) Check reeds. Clean and replace reed mounting plate and stops. 8) Remove flywheel and replace condensors and points. Set to .020" @ TDC. 9) Clean exhaust port and piston tops. Replace gaskets and torque up. 10) Check all gaps. Set Jets as per manual. Run at full speed and load to test. I haven't finished yet, but so long as I'm careful I hope and pray that the motor will give me some years of service. I am confident that she will. She sounds sweet when she is running which is one of the reasons why I thought she was worth the trouble. Also, most motors made today are much heavier. This was a big factor in deciding to push ahead and do a partial rebuild. I am an experienced electronics technician and also have experience in working on cars and motor cycles in my youth. Mind you, I do not consider this work difficult, just need to keep your wits about you. :)

by

Customers Also purchased

Aftermarket Product Interchange

Name SKU Price Brand
Fuel Pump Gasket 18-0850 $2.77 Sierra Marine
Gasket (Min. Qty 5) 34080 $2.23 GLM Marine
Gasket, Fuel Pump 9-60436 $2.99 Mallory Marine

Flat $3.95 Shipping on ALL parts orders

We offer shipping flat $3.95 shipping on ALL parts orders. (Complete Engines, Lower Units and Sterndrives excluded). In addition orders over $89 have reduced cost express shipping available in checkout.

shipping map shipping map legend

You can get a rough idea of standard transit times from the map above.