Crowley Marine: serving boaters for over 40 years Crowley Marine: serving boaters for over 40 years
Parts in stock Most parts in stock Same day fulfillment
$3.95 shipping on all orders*
Low Price Guarantee
9.6 Pilot logo
0My cart
Cart is empty

Bearing Housing to Propeller Shaft Oil Seal 0321481

Satisfaction rating 5 out of 5 (31 Ratings)
$14.95
Save $2.24 (13%)
5+ IN STOCK Ships Immediately

Last update: 1 days ago Update Now

  • Guaranteed fitment for 6 different models
  • This is an OEM part manufactured by Johnson/Evinrude, OMC
  • Flat rate shipping starting at $3.95
  • 30 day return policy

Product Description

Bombardier factory part. Search for more factory parts & parts diagrams.

2 Product Questions

Rick Terry

Is this the correct seal for a 1995 Johnson Model # - J15REOD Serial # - G 03790686 Thanks!

Answer:

Hello, Rick. Yes, this will be the correct seal for your engine.

Jon Caldwell

Does it come with 2 seals or you just get one seal?

Answer:

That part number is individually priced and sold. If needed two, you would have to order QTY of 2

the best service I have had from an online parts supplier. Quick, accurate and knowledgable.
by

Correction of initial shipping error was OUTSTANDING!
by

had the parts i needed in stock and delivered fast to the uk.
by

Have what I need . Fast shipping. A+
by

I had to get parts that I had ordeted incorrectly got in touch with them had new parts shipped right away motor back together. Thanks to your staff and their help
by

by

Superb
by

evinrude 15 hp

j'ais recue ma commande rapidement je suis très satisfait merci !
by

by

GREAT
by

by

This was my 2nd order with Crowley. Website is easy to navigate and delivery very timely. Will definitely use again and recommend to others.
by

For an unusual part for a 1967 or 1968 outboard motor we got great service. Thanks
by

by

Excellent. Got what I ordered. Got it on time and knew where my order was all the time. Very good
by

great
by

Evinrude 9.9

Repair Difficulty
Medium
Repair Time
2 to 4 hours
Fast shipping. I was hopping it would come fast and I got it earlier than I even hoped. Parts are perfect.
by

Problem fixed: Water was not being expelled after an impeller replacement

Removed the cover latch. Had to pry cowling to get bolt out for the latch. Removed bolts holding cover on removed cover. Cleaned surfaces and blew out passages installed new thermostat and thermostat gasket glued new cover gasket to cover replaced cover using screwdriver to hold spring in to place cover correctly installed bolts and tightened evenly. Replaced latch and tested.

by

so far so good. better than local suppliers. that's important as a self employed marine mechanic.
by

Excellent. Very good parts lookup and good prices. This my second order and will be my source for outboard parts in the future.
by

Johnson 9.9 outboard

Repair Difficulty
Medium
Repair Time
More than 4 hours
Once again Crowley Marine came through with the parts I needed for my old Johnson 9.9. I have no problem recommending Crowley to anyone.
by

Problem fixed: Low compression on one cylinder and leaky seals in lower unit.

The first plus was having the original parts and repair manuals. Slowly dismantling and tagging parts as I proceeded. I listed everything that could be replaced or refreshed and orders same. When finished I had found an weak reed valve, installed carb and water pump kits along with lower seals and numerous gaskets and gromets. Now runs like a new motor.

Excellent experience. Fast shipping. Thank you.
by

Johnson 9.9

Repair Difficulty
Easy
Repair Time
2 to 4 hours
Every thing I bought impeller kit, drive and prop seals fit perfectly. Fuel pump fit, but needed new fuel lines (should have come with new fuel pump) Good place to get replacement parts!!!
by

Problem fixed: Water mixing in lower unit. Also engine stalling out after prime

Replaced seals in lower unit, had to polish drive shaft before installing new impeller and seals. R & R'd fuel pump and new fuel line to carburetor

by

by

by

I appreciate the assembly diagrams and the parts list. The delivery was very prompt. Thank you
by

1984 Evinrude 15hp rope start

Repair Difficulty
Medium
Repair Time
1 to 2 hours
Always had excellent service from Crowley Marine ordered parts and received in the UK very fast, extremely happy with their service I don't look any where else.
by

Problem fixed: water in lower unit and poor cooling

Removed lower unit remove water pump removed drive shaft oil seals under water pump replace seals fit new water pump kit refit lower unit repairing gear change shaft clamp, replace lower unit oil and test run perfect. Makes my Honwave t30ae fly

by

Evinrude 9.9 hp 10924b

Excellent. Thank you for the great service.
by

Fair prices, prompt, painless, what else matters?
by

Product Fitment Grid

This guide is to be used as a reference only. You must verify fitment using your model or serial number.

BRAND MODEL 1974 1975
Evinrude Outboards 9.9 x x
Evinrude Outboards 15 x x
Evinrude Outboards 40 x x
Johnson Outboards 9.9 x x
Johnson Outboards 15 x x
Johnson Outboards 40 x x

Customers Also purchased

Supersession Chain

Name SKU Superceding SKU
Bearing Housing to Propeller Shaft Oil Seal VIEWING THIS PRODUCT 0321481 CURRENT
Seal (Bearing Housing to Propeller Shaft) 0319256 0321481

Aftermarket Product Interchange

Name SKU Price Brand
Oil Seal 18-2029 $12.33 Sierra Marine

Flat $3.95 Shipping on ALL parts orders

We offer shipping flat $3.95 shipping on ALL parts orders. (Complete Engines, Lower Units and Sterndrives excluded). In addition orders over $89 have reduced cost express shipping available in checkout.

shipping map shipping map legend

You can get a rough idea of standard transit times from the map above.