Breaker Points Assembly 0580148
- This is an OEM part manufactured by Evinrude & Johnson, OMC
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Description
2 Product Questions
bill
Answer:
Unfortunately that product is no longer available. We are no longer able to source this product through Mercury and do not offer aftermarket products.
charles harrison
Answer:
We would need to know the model number (or at least the year) of your motor. You can look up parts for your motor using our parts catalog here: http://www.crowleymarine.com/omc_parts.html
73 Product Reviews
Evinrude
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: Would not start, no spark
The boat is a 16' sylvan with a 40hp Evinrude (1971) that was sitting for 21+ years. After replacing the wiring the mice feasted on, the engine had no spark. I removed the flywheel and found the points badly worn and the lamination on the coils deteriorated and windings exposed. I replaced the coils, spark plug wires, points and condenser. The reason I called this medium difficulty was that the bushing in the breaker points was .012" too small and would not fit on the pin. I had run a 3/16" (.1875") reamer through the bushing. After about 4 beers and two to three hours. The points were set @.020", engine back together,and that old thing fired up on the second pull. Not bad for a 50 year old engine.
Evinrude,
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Evinrude
- Repair Difficulty
- Medium
- Repair Time
- 2 to 4 hours
Problem fixed: Water got into cylinder
Disassembled motor Honed cylinder Cleaned all needle bearings Reassembled motor Waiting on gaskets to finish
Johnson 4 hp 1975
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Power head locked up
Took power head off got it to brake loos waiting on parts
1957 Johnson 18HP
- Repair Difficulty
- Medium
- Repair Time
- More than 4 hours
Problem fixed: Rebuild
Complete rebuild of an old Johnson.
1971 Evinrude 25hp
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: No fire
New breakers and condensers fixed the problem.
Evinrude 4 Hp
- Repair Difficulty
- Medium
- Repair Time
- More than 4 hours
Problem fixed: difficulties to start the engine and then running on one cylinder only
Replacement off all items off ignition system: Breaker Points Assembly 0580148 (2) Condenser 0580321 (2) COIL&LAM AY,W/GROM 0584477 (2)
Johnson 40 hp
6r72d johnson
Evinrude 1.5 hp Mate
johnson 4hp
- Repair Difficulty
- Medium
- Repair Time
- 2 to 4 hours
Problem fixed: water pump r&r
complete tune up and water pump assy . r & r
1970 Evinrude 4HP
4hp evinrude 1973
- Repair Difficulty
- Easy
- Repair Time
- More than 4 hours
Problem fixed: No compression top cylinder
First determined it had no compression in upper cylinder. Found ruptured head gasket. Slight water damage and rings stuck to piston. Complete tear down of power head, freed piston rings, slight hone of cylinder . Measured cylinder to piston bore to piston and found minimal wear. Also found original coils all cracked.. Reassembled motor, new gaskets, points, coils, and spark plugs. I will wait for spring to test in outdoor tank.
'67 Evinrude 1.5
Customers Also purchased

COIL&LAM AY,W/GROM
0584477
Driveshaft Oil Seal
0327031
Fuel Filter Screen
0312633
IMPELLER & KEY
0434424
IMPELLER (377178)
0775519
Impeller Assembly - Water Pump
0382221
Spring Clip, Rocker arm
0307594
Thermostat Assembly
5005440Supersession Chain
Name | SKU | Superceding SKU |
---|---|---|
Breaker Points Assembly VIEWING THIS PRODUCT | 0580148 | CURRENT |
CONTACT SET | 0777677 | 0580148 |
Obsolete BRP Part | 0580176 | 0580148 |
Obsolete BRP Part | 0580173 | 0580148 |
Obsolete BRP Part | 0580174 | 0580148 |
Aftermarket Product Interchange
Name | SKU | Price | Brand |
---|---|---|---|
Contact Set | 18-5156 | - | Sierra Marine |
Point | 70070 | $9.35 | GLM Marine |