Gearcase to inner Exhaust Housing Seal 0320961
- This is an OEM part manufactured by Evinrude & Johnson, OMC
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Description
Product Questions
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
98 Product Reviews
Johnson Oceanrunner 200
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
Problem fixed: Fuel leak
Found fitting nag on carburetor inlet leaking replaced bowl and gasket worked great
2012 Evinrude E-Tec 150HP
- Repair Difficulty
- Medium
- Repair Time
- 2 to 4 hours
Problem fixed: 3 year/300 hour service
I replaced all of the parts for the 3 year/300 hour service. Crowley Marine had all of the parts in stock that I could not find locally.
Johnson 88spl
- Repair Difficulty
- Medium
- Repair Time
- 30 to 60 mins
Problem fixed: Thermostat
No broken bolts. Thank you JESUS
Evinrude E-TEC 200 hk
Johnson 150
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: Water in gearcase.
Replaced driveshaft seal.
E115FSLSRE
Evinrude 250
2004 evinrude 150 e150fhlsrs
- Repair Difficulty
- Easy
- Repair Time
- 1 to 2 hours
Problem fixed: lower unit broke off lost in lake
replaced the exhaust housing .upper exhaust and lower .replaced lower unit.
140 Evinrude
evinrude 250
Johnson 150 VRO
- Repair Difficulty
- Medium
- Repair Time
- 2 to 4 hours
Problem fixed: Routine maintenance
Had a heck of a time getting to the shifter rod bolt to drop lower, but I got it and will reassemble shortly ….
Evinrude 150 spitfire
johnson 90hp
- Repair Difficulty
- Hard
- Repair Time
- More than 4 hours
Problem fixed: lower rubber mount
i have to do a lot of chiselling and hammering coz its corroded very badly.
Evinrude 150
06 Evinrude 150
Johnson 150 1993
- Repair Difficulty
- Easy
- Repair Time
- 30 to 60 mins
Problem fixed: Low water pressure
Water pump replacement,
2005 Evinrude ETEC 90
- Repair Difficulty
- Hard
- Repair Time
- 2 to 4 hours
Problem fixed: Water pump seals and internal anoid
I needed a new water pump and anoid on lower shaft carrier unit and seals on carrier as well as seals under water pump i ordered parts as usual delivery on time. As i was checking my manual i realized i needed an exhaust seal that i failed to order so called Crowley they had part i opted for three day shipping and got part on time to start repair . these are good people and have had parts when i needed them i will order from them again thank you Crowley Marine Steve B.
Evinrude etec
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: Hard shift
Dropped lower unit and replaced shifter cover and also replaced thermastats
1989 evinrude 225
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Evinrude
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: New water pump, upper exhaust sleeve.
Fist time doing these types of repairs other than on automobiles and smaller engines. Went easy just U tubed it and made it go easy.
Johnson 235
- Repair Difficulty
- Hard
- Repair Time
- More than 4 hours
Problem fixed: Lower unit wouldn't shift
Remove lower unit. Remove & replace broken shift rod connector. Prepare lower unit for reinstallation. Reinstall lower unit and align and connect shift linkage. Torque fasteners.Verify shift sequence.
48 evinrude
94 Evinrude
96 Johnson 115
- Repair Difficulty
- Easy
- Repair Time
- 1 to 2 hours
Problem fixed: Replaced water pump ,exhaust gaskets , inlet screen and anodes
Started with water pump but found problem with exhaust volute gaskets once inside lower unit. Replaced inlet screen and anode due to deterioration.
1985 Johnson 140hp
evinrude 50hp
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: heating problem and lower unit leak
replace water pump assy and reseal lower unit
ETEC 150
johnson 140 hp.
- Repair Difficulty
- Hard
- Repair Time
- More than 4 hours
Problem fixed: resealed lower unit
Removed lower unit and disassembled, realized that I needed a Factory Service Manual to reference for pinion gear and shift rod adjustment. I also ordered the OEM gasket sealer. Repair was completed with no leaks.
johnson 90hp
- Repair Difficulty
- Medium
- Repair Time
- Less than 30 mins
Problem fixed: cooling system not working properly.
Disengage lower unit to access the impeller and change the two thermostats on the power head. Relatively, easy.
Evinrude 140
Evinrude 200
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
Problem fixed: Engine sat for more than ten years.
Had an old Evinrude 200 that had been sitting for a long time. Changed out the impeller and put the motor on a bass boat I picked up. It's a gas guzzling beast.
Jonhson 120
Customers Also purchased

Driveshaft Oil Seal (Lower)
0329923
Driveshaft Oil Seal (Upper)
0329922
Exhaust Housing Seal
0320936
Gearcase Anode & Insert Assembly
0436745
Thermostat Assembly
5005440
Upper & lower Seal
0330137
Water Pump Repair Kit (Includes Impeller Housing)
5001594
Water Pump Repair Kit (Includes Impeller Housing)
5001595Supersession Chain
Name | SKU | Superceding SKU |
---|---|---|
Gearcase to inner Exhaust Housing Seal VIEWING THIS PRODUCT | 0320961 | CURRENT |
Shift Bracket Seal | 0777896 | 0320961 |
Aftermarket Product Interchange
Name | SKU | Price | Brand |
---|---|---|---|
Oil Seal | 18-8353 | - | Sierra Marine |