Primer Hose Tee 0325569
This product will be cross shipped from one of our secondary warehouses. Please note the additional handling time.
This product is not being produced anymore however may still be available through other dealers.
- This is an OEM part manufactured by Johnson/Evinrude, OMC
- Flat rate shipping starting at $3.95
- 30 day return policy
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
JOHNSON 1990 25HP
- Repair Difficulty
- Repair Time
- Less than 30 mins
Problem fixed: MOTOR WOULD NOT START, DEFECTIVE PRIMER ASSEMBLY
Motor would not start. The blue barbed fitting on the primer assembly broke off. when I would attempt to prime the motor, fuel would squirt into the lower motor housing rather than feed the carburetor behind the butterfly plate. The repair was extremely easy. I removed both the inlet hose from the carb feeding the primer assembly and the much smaller diameter discharges hose that runs to the carb. I also replaced the tubing because the old tubing looked brittle and dry rotted. The motor startee right up with the new primer assembly.
Customers Also purchased
Ignition Coil Assembly
Throttle Lever Link Retainer
Parts included in this kit
Please note: Some of the included items may not be available for purchase separately and won't be listed here.
|Cap & O-Ring Assembly||0432145||Johnson/Evinrude, OMC|
|Filter, Fuel Mini & Water Separator||0438017||Johnson/Evinrude, OMC|
|Housing & Nipple Assembly||0394337||Johnson/Evinrude, OMC|
|Plunger & Valve Assembly||0432143||Johnson/Evinrude, OMC|