Leaf Valve 0318922

Satisfaction rating 5 out of 5 (6 Ratings)

$22.95

You save $1.54. (6%) $24.49

5+ IN STOCK

Ships Immediately

Guaranteed fitment for 2 different models
This is an OEM part manufactured by Evinrude & Johnson, OMC
Flat rate shipping starting at $4.95
30 day return policy

Product Description

Bombardier factory part. Search for more factory parts & parts diagrams.

Refresh

Product Questions

There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.

Refresh

6 Product Reviews

Exceptional Thank you

Aug, 15 2020 by

Jack

Johnson J15eltcr

Repair Difficulty: Hard
Repair Time: 2 to 4 hours

Good communication. Would definitely reccomend to anyone!

Jul, 22 2020 by

Jason

Problem fixed: Engine died and would not start

Diagnosed as a broken reed valve when compression, spark and fuel were confirmed and engine still wouldn’t fire. Could only have been lose of crankcase pressure and both crankshaft seals were ok. Tore down the motor and sure enough inside the exhaust cover on the port side of the motor were chewed up pieces of reed valve. Checked cylinders and pistons for scoring and luckily none found. Flushed power head with diesel fuel to rinse out any remaining metal fragments before reassembly. Put it all back together with new reed valves and gaskets and voila! Motor runs mint.

-94 Evinrude 9.9

Repair Difficulty: Easy
Repair Time: Less than 30 mins

Great.

Jul, 01 2019 by

Mattias

Problem fixed: No idle. Hard to start. No reaction when adjusting the mixture screw. You can keep the motor running with a lot of throttle

Fuel pump and carburator ovehaul with new gaskets and jets. After reassembly I searched for air leaks with start gas with no result. Checking and adjusting the ignition timing but no success. Checked the reed valves and found a crack in on of them and one finger on one of the the leaf plates was gone. Ordered new parts from crowley marine. After this repair the motor runs nice and smooth.

I get my stuff fast with these guys!

Jun, 18 2019 by

Glenn

10R76-H Johnson 9.9

Repair Difficulty: Medium
Repair Time: More than 4 hours

I was very happy to work with Crowley Marine. Parts orders were filled promply and I am not finished with this project yet so expect continue to call appon Crowley for help. Good Job!

Feb, 07 2017 by

Lee

Problem fixed: Hard starting and low compression on on cyclinder and lower unit seals.

I am experienced on car engines but new to 2 cycle outboards so this is a learning experience for me. Luckly I got the manuals with it which match Crowley parts lists exactly. This project is taking longer than expected due to HoneyDo's interference :). Finding the parts so easily is making the process much more enjoyable.