Contact Us
My Account
Search Over 1 Million OEM Parts
Most parts in stock- Same day fulfillment

Select your engine to find guaranteed-fit parts:

Driveshaft Oil Seal 0327031

Satisfaction rating 5 out of 5 (60 Ratings)
$12.95
You save $0.54. (4%) $13.49
5+ IN STOCK
Ships Immediately
Evinrude & Johnson logo
  • Guaranteed fitment for 6 different models
  • This is an OEM part manufactured by Evinrude & Johnson, OMC
  • Flat rate shipping starting at $4.95
  • 30 day return policy

Product Description

Bombardier factory part. Search for more factory parts & parts diagrams.

Product Questions

There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.

60 Product Reviews

Top service and team!
by

by

Johnson 2 H.P.

Repair Difficulty
Easy
Repair Time
2 to 4 hours
Great service on the phone! Quick delivery too......
by

Problem fixed: rebuild

Crowley had all of the parts I needed. Very navigable website with good exploded views of my outboard. Excellent experience.

by

Very good. Easy to find the parts I need. Very good order confirm. I will come back to you, wen I need parts. Have a Nice day Best regards Arild
by

Evinrude 1.5 HP 1969

Repair Difficulty
Easy
Repair Time
More than 4 hours
Not the first time dealing with Crowley Marine and it is again outstanding!
by

Problem fixed: Overhaul Carburator, ignition and lower unit (water pump impeller and propeller shaft and gear

Repair is ongoing.

by

Evinrude 4ch

by

Excellent. Thank you.
by

1953 3HP EVINRUDE LIGHTWEN OUTBOARD

Repair Difficulty
Easy
Repair Time
Less than 30 mins
CROWLEY MARINE. INC IS A GREAT STORE TO BUY FROM. THEY HAVE A LOT OF VENTAGE PARTS FOR OLD OUTBOARD'S. WILL ORDER FROM THEM AGAIN. THANK YOU CROWLEY MARINE. INC.
by

Problem fixed: LOWER UNIT GETING WATER IN OIL.

TOOK PROP OFF LOWER UNIT . TOOK TWO MACHINE THREAD SCREWS OUT PULLED PROP SHAFT + SEALS OUT OF LOWER UNIT REPLACED SEALS.PUT IT BACK TOGATHER. ( DONE)

2 hp Johnson

Repair Difficulty
Medium
Repair Time
Less than 30 mins
No hassle.correct own part
by

Problem fixed: Old style water pump not pumping

Replacement was modern stainless impeller kit

EVINRUDE 3HP

Repair Difficulty
Easy
Repair Time
30 to 60 mins
AWESOME
by

Problem fixed: OIL GETING INTO WATER

UNBOLTED THE LOWER UNIT REMOVED DRIVE SHAFT AND WATER PUMP REPLACED DRIVE SHAFT OIL SEAL.THIS OUTBOARD IS A 1953 2 CYCLE 2 CYL VENTAGE MOTOR. NICE LITTLE ENG.THANKS GUY'S AT CROWLEY MARINE INC.

1972 2HP Johnson/2R72M

Repair Difficulty
Easy
Repair Time
1 to 2 hours
by

Problem fixed: Lower unit taking water

Replaced shaft seals as lower unit taking water. Replaced the water impeller while I was at it. Hard to find someone who sells them here in Canada but, Crowley Marine's got them. Can't wait to have fun with it comes summer.

Great dealing with you! Product order took a while but all complete and time is ok. What can you do if the manufacturer is supplying. Very responsive customer service. Always pleasant
by

by

by

Great!
by

by

4W79D

Repair Difficulty
Easy
Repair Time
30 to 60 mins
GREAT! THE EXPLODED VIEW PARTS CATALOGS ARE AWESOME FOR THE OLDER OMC ENGINES
by

Problem fixed: WOULDNT RUN

CLEANED FUEL TANK AND REBUILT CARBURETOR

Parts arrived when scheduled. Site easy to use. No issues.
by

Johnson 9.5hp

Great!!
by

Johnson 5 HP

Great. There was a 3 month wait for some parts here in Australia and Crowley Marine had them in stock. Placed the order with ordinary mail and they arrived yesterday . 5 weeks was better than 3 months locally. will definitely use again. Thanks Crowley Marine.
by

very good
by

Excellent. My order arrived later than I expected but it was because we had very serious bush fires in our area and the mail was not able to be delivered. My inquiry was answered promptly. Very pleased.
by

Overall my experience was good. I ordered a few parts off of the parts diagram for my 1965 6hp Johnson. However, one of the "part numbers" was for the pull start cord, so I ordered one of those as well. When my order arrived I found a completely useless 1 foot piece of start cord in a bag. I can only guess that the intention was to order this by the foot but that was not marked at all on the site and the fact that someone at Crowley actually cut a 12 inch piece and included it in my order is ridiculous.
by

by

Evinrude 2hp model 2602

Repair Difficulty
Medium
Repair Time
30 to 60 mins
good quality products, fast delivery from FED-EX.
by

Problem fixed: not pumping cooling water, water in bottom gear housing

Replaced water pump impeller. Bottom oil seal was difficult to remove. I had to put a 0.015" copper shim in behind the oil seal, as the prop shaft had signs of wear.

by

1976 Evinrude 2hp

Repair Difficulty
Easy
Repair Time
30 to 60 mins
Delivery to Grand Portage Minnesota was very fast. Excellent parts selection that are of good quality.
by

Problem fixed: Engine not pumping water, water leaking past prop seal.

Original water pump kit would not fit this outboard, (my mistake). Had to install old impeller, by reversing the impeller blade rotational curve (temporary fix). New order has the new impeller installed.

by

Good service . Shopping site excellent
by

Right parts quick shipping.
by

Top notch
by

Order packed same day, shipped next day, excellent communication, order arrived as per USPS, items exactly as ordered, flat rate postal service. Great service. Thanks!
by

1958 Evinrude 5.5hp

Very good communication and customer service. Multiple emails about order and delivery status to help me track the order. Shipping was very quick to Canada. This will be my go-to supplier for OMC outboard parts.
by

Bought seals for my gool old evinrude 4. Will restore it to it's former glory this summer! Very fast shipping to Russia!
by

johnson 4hp 1980

by

Easy to find the parts I needed on-line. Quick shipment. Good customer service. I would recommend to others.
by

by

Johnson 6hp cd22

Repair Difficulty
Easy
Repair Time
Less than 30 mins
Great part delivered lighting fast Boat in water no time flat
by

Problem fixed: Water in oil

The water pumping through would come out oily. Changes seals doing fine now

by

Great experience, parts came quickly.
by

by

Website is easy to navigate and the selection of parts for older motors is excellent in particular my Johnson 1R69C 1.5 hp.
by

Johnson Sail 4

Great - Many Thanks
by

by

2 hp 1975 evinrude

had all parts needed for a 1975 motor
by

by

Dispatched very quickly, delivered to the UK in a few days, excellent service.
by

1982 2 hp evinrude

good. took almost 2 weeks to get my order because some parts were not in stock. when my order arrived , a couple of small parts were not in the order. called and received missing parts in 2 days.
by

Will definitely buy from Crowley again. Fast and accurate service.
by

Great people to get your parts from. Highly recommend!
by

Very good, quick service and handling. I have recommended you to my neighbour.
by

outstanding
by

Great. Couple parts turned out to be nla but I got most of what I need.
by

Johnson 4 HP

Repair Difficulty
Hard
Repair Time
More than 4 hours
by

Problem fixed: Overheating

Had to replace water pump impeller, which was easy. The hardest part was also replacing the 2 lower case seals, which are installed one-way (blind). A little bit of heat and small vice grips finally got them out. Also disassembled and lubricated the exhaust housing so I could clean and lube the bearings that the motor pivots on as this was dirty. Luckily I had the shop manual, but it had no detail on the seal replacement procedure. Crowley's exploded view diagrams are very helpful and can be copied off the website for reference.

Johnson 3.5hp

Repair Difficulty
Medium
Repair Time
1 to 2 hours
Could not have received better service. Considering that my purchase was minimal and I was a casual customer. I would recommend this store unreservedly.
by

Problem fixed: Oil leaking from gearcase

Extracted and replaced drive shaft oil seals in the gear case. Extracted and replaced seal for the shift change rod where it entered the gear case. I threaded the brass bush and making a very basic extractor with a long screw and metal plate the actual job was very simple.

by

'67 Evinrude 1.5

This is my second order from Crowley. Both orders shipped quickly with the correct parts packaged safely inside. On my most recent order I saved $27 just on shipping. Parts I need are always in stock except for obsolete things such as the transom mount for my '67 Evinrude, but nobody has those. Crowley is my go to store.
by

by

Product Fitment Grid

This guide is to be used as a reference only. You must verify fitment using your model or serial number.

Customers Also purchased

Supersession Chain

Name SKU Superceding SKU
Driveshaft Oil Seal VIEWING THIS PRODUCT 0327031 CURRENT
Oil Seal 0777544 0327031
Gearcase Head Seal 0300599 0327031

Aftermarket Product Interchange

Name SKU Price Brand
Oil Seal 18-2035 - Sierra Marine