Crowley Marine: serving boaters for over 40 years Crowley Marine: serving boaters for over 40 years
Parts in stock Most parts in stock Same day fulfillment
$3.95 shipping on all orders*
Low Price Guarantee
9.6 Pilot logo
0My cart
Cart is empty

IMPELLER & KEY 0434424

Satisfaction rating 5 out of 5 (47 Ratings)
$18.95
Save $3.34 (15%)
5+ IN STOCK Ships Immediately

Last update: 36 days ago Update Now

  • Guaranteed fitment for 8 different models
  • This is an OEM part manufactured by Johnson/Evinrude, OMC
  • Flat rate shipping starting at $3.95
  • 30 day return policy

Product Description

Bombardier factory part. Search for more factory parts & parts diagrams.

1 Product Questions

Bill J.

The impeller on my 1973 Evinrude model 6302 S has shorter and beefier arms. Is the impeller shown in your description for part # 0434424 the exact figure, or a "reasonable facsimile thereof"? I believe mine is the original? Thank you for any help, Bill Jendruch archer@bex.net

Answer:

Going off of your model, the correct one would be 0434424. That is a newer part number. The original number was 0277181

evinrude 6cv de 1970

Repair Difficulty
Medium
Repair Time
1 to 2 hours
Commande très rapide le moteur fonctionne très bien MERCI
by

Problem fixed: Pas de refroidissement en eau

turbine casse boulon casse

evinrude 25hp and 6HP

by

by

evinrude 6hp fisherman

by

Evinrude 6 Hp

Repair Difficulty
Medium
Repair Time
30 to 60 mins
We were able to communicate in plain English, and they send me right parts. I didn't have to go to hardware store to buy special screwdriver.
by

Problem fixed: Blown exhaust gasket

Unscrew cover. Remove old gasket. Stop my hands from shaking. Carfully atempt to place new gasket untill it looked like good fit. Placed cover back on and screw it back on without demaging new gasket.

Excellent service. Fast delivery!!!
by

Everything was good as far as finding and ordering the parts. But very dissatisfied with the 2-3 day expedited shipping I paid 9.95 for and it was a week later before the parts arrived.
by

Johnson 6hp

Repair Difficulty
Medium
Repair Time
1 to 2 hours
Excellent service! Quick shipping with updated delivery info!
by

Problem fixed: Lower unit wouldn’t pump water.

Lower unit wouldn’t pump water while running, causing the engine to over heat. So i Dissembled the lower unit and replaced the impeller (current impeller was weather from sitting over time) reassembled the lower unit and tried it out but still no water pumping! Turns out it was the thermostat! Ordered through Crowley Marine (as I did with impeller) and it arrived quickly! And now my outboard motors works like new!

Great to deal with and very quick overseas postage, would purchase again from this store
by

Evinrude 25 hp outboard

Very good
by

très bien , rapide et fidèle au modèle présenté;
by

Johnson 4 hp

Very good, just took a little longer than I expected to get my purchase.
by

by

Good response and quick shipping
by

Everueda 15ph.

SUPER!
by

Ordering simple. Fast delivery. Old Johnson engine and the parts were still available. Very satisfied.
by

by

by

very good.
by

Johnson 4hp

Received exactly what I ordered in the time promised.
by

Good prices and Fast shipping I have ordered from these guys several times!!
by

by

by

81 johnson 4 hp

Repair Difficulty
Easy
Repair Time
30 to 60 mins
by

Problem fixed: None

Found this little engine on side of the road, starter cover is missing, Engine had compression but no fire. Removed flywheel and all the ignition parts were rusted. Sandblasted all the parts just to see if engine would run. It did, very nicely too, Ordered water pump because of not knowing history of engine. Going to find a starter, replace the point and condenser and giver her a paint job.

by

by

Evinrude 3hp outboard

Would definitely recommend this store for parts,they was so helpful the first time that they are my go to parts store
by

Great experience! Parts were in stock and received them quickly. Would recommend this store.
by

Evinrude 1976, 6 HP

Repair Difficulty
Medium
Repair Time
Less than 30 mins
Good selection of parts for older model outboard motors. Fast delivery.
by

Problem fixed: Worn & broken parts plus future parts anticipated repairs

Intend to replace control arm throttle gear and grease cover. Replace grease fitting. Impeller and shear pin for future replacement as needed.

Evinrude fisherman 6cv

by

by

It's always easy to order, Cowley Marine always has what I need and fast delivery
by

4 hp evinrude

Repair Difficulty
Easy
Repair Time
Less than 30 mins
Very good service
by

Problem fixed: Head gasket and water pump

Pulled head off removed two broken bolts cleaned head surface installed gasket tighten head. Removed water pump impeller installed new one then tested motor then took to lake to fish with and make sure repair was good ran 5 hrs ready to sell motor

if you look in to it you will see that Johnson has a newer water pump that come out in the 90.s for the 70's 6 hp that is what I have in my Johnson there is a big water pump & a little water pump but you should know that you sell parts every day .
by

by

by

evinrude 4 hp

Repair Difficulty
Medium
Repair Time
30 to 60 mins
fit perfectly
by

Problem fixed: engine overheated

remove 4 bolts from lower unit .remove 2 bolts from water pump housing, pull off rubber pump impeller.reassemble

I had ordered two water pump impeller's with key's. I received one impeller with a key the other impeller came without a key and had to use the old one. I was not happy with that situation due to the labor involved with replacing the water pump impeller.
by

Johnson 6 hp

Repair Difficulty
Medium
Repair Time
1 to 2 hours
by

Problem fixed: Water pump out

Video makes it easy

Johnson FD 16

Good experience, item shipping good and recieved quickly.
by

Great and fast service!
by

It was easy to order parts and receive them on time. Thank you
by

Very good, price ok, reasonable shipping cost
by

Johnson 6hp

by

First class! Couldn't have been better. The outboard, a 1974 Fisherman 6, is now running sweetly. Parts were received here in England within a week.
by

got to say it was all done on line .. i did not go to the store i live in QUEBEC CANADA
by

very happy with your service
by

Product Fitment Grid

This guide is to be used as a reference only. You must verify fitment using your model or serial number.

BRAND MODEL 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982
Evinrude Outboards 3 x - - - - - - - - - - - - - -
Evinrude Outboards 4 - x x x x x x x x x x x x x x
Evinrude Outboards 5 x - - - - - - - - - - - - - -
Evinrude Outboards 6 x x x x x x x x x x x - - - -
Johnson Outboards 3 x - - - - - - - - - - - - - -
Johnson Outboards 4 - x x x x x x x x x x x x x x
Johnson Outboards 5 x - - - - - - - - - - - - - -
Johnson Outboards 6 x x x x x x x x x x x - - - -

Customers Also purchased

Supersession Chain

Name SKU Superceding SKU
IMPELLER & KEY VIEWING THIS PRODUCT 0434424 CURRENT
Impeller Assembly 0277181 0434424

Aftermarket Product Interchange

Name SKU Price Brand
Impeller 18-3001 $17.76 Sierra Marine
Impeller 89580 $18.83 GLM Marine
Impeller 9-45216 $16.99 Mallory Marine

Flat $3.95 Shipping on ALL parts orders

We offer shipping flat $3.95 shipping on ALL parts orders. (Complete Engines, Lower Units and Sterndrives excluded). In addition orders over $89 have reduced cost express shipping available in checkout.

shipping map shipping map legend

You can get a rough idea of standard transit times from the map above.