Crowley Marine: serving boaters for over 50 years Crowley Marine: serving boaters for over 50 years
Parts in stock Most parts in stock Same day fulfillment
$3.95 shipping on all orders*
Low Price Guarantee
9.6 Pilot logo
0My cart

Johnson-Evinrude V6 Standard 150-250HP 1979-2010 BRG603N

Satisfaction rating 5 out of 5 (7 Ratings)
$2,040.00
Save $174.00 (8%)
Ships Immediately
  • This is a Crowley Marine brand product
  • Flat rate shipping, no hidden fees
  • 30 day return policy

Product Description

Remanufactured or new lower unit for Johnson/Evinrude standard "O" type gearcase 150 thru 250 horsepower engines manufactured from 1979 to 2010. Includes break-in instructions. Standard rotation gearcases are only available new and counter rotation gearcases are only available remanufactured. Carries a full one year warranty.

Note: 1979-1991 models have a 1-piece driveshaft and will have to be upgraded to use a 2-piece driveshaft. An upper driveshaft can be added for $135. You will reuse your original shift rod.

Our low shipping charge includes a prepaid shipping label so that you can return the core back to us. Core charge is fully refundable upon receipt of a good core. Please read our core policy.

Read more about our remanufactured lower units.

1 Product Variations available

1979-2010 V6 Lower Unit -- 150-250 HP - Standard Rotation - New BRG603N

  • Rotation: Standard
$2,040.00
You save $174.00. (8%)
5+ IN STOCK Ships Immediately
$2,040.00
You save $174.00. (8%)

6 Product Questions

Jim

Could you please tell me the difference between a fresh water lower unit and a salt water lower unit? Can you put a fresh water unit on a salt water motor? Also are they different colors from the factory? Thank you very much! Jim

Answer:

Hello, A Salt water unit is coated a little different to with stand the extra beating it takes from being in the ocean with the salt water. What Model number do you have and I can tell you the correct one needed. Thank you

Jim

Hello, I have a 2000 200 hp evinrude ficht. Model Re200fXSSH. Serial # G 04822648. Could you please tell me the correct unit I need to order? Thanks, Jim

Answer:

Hello Jim, Yes, this will be the correct part but please be aware there is a counter rotation and standard rotation. Choose the one that fits your model. Please let me know if you have any further questions. Kind regards, Joe

frank

I have a 1996 johnson ocean runner 150hp J150exed standard or counter rotation ? one pice or two

Answer:

This unit would be standard rotation with a two piece driveshaft.

August Schnabel

i like to order gearcase BRG604N. i like to make sure this fits Evinrude E225DCXIID, year 2010, gearcase p/n 5007670 (new no 5009899)

Answer:

That unit is actually coming up as a 2011. The unit you mentioned only goes upto 2010 and would not be compatible for your application.

Mike

I have a E225DHLSOC motor with a trashed gearcase. Serial number of motor is 05113014. Do you have a complete gearcase available and what is warranty and cost Please email Mike@cjboats.com or call 270-646-2660

Answer:

Hello, We can only get that gearcase new from Evinrude. That would be $4487 and that has a 1 year warranty. Thank you,

Carl Hack

Your V6 lower units indicate model year up to 2006. I need to place an order for a 2007 E250DPLSU - will your unit fit?

Answer:

This is the standard (or Offshore style) lower unit which was only put on some motors 2006 and prior. The 2007 model you have has a Magnum style lower unit which we currently only offer new from Evinrude. That is available as item 1 here: http://www.crowleymarine.com/johnson-evinrude/parts/63323.cfm.

7 Product Reviews

Johnson 200hp

Knowledgeable, fast, friendly service.
by

by

The sales staff was very helpful in tracking down my lower unit. Shipping was quick and my mechanics had no problems. Me however need total knee replacement. So no fishing
by

150 E-tech 2007 Model

Repair Difficulty
Medium
Repair Time
1 to 2 hours
Very good so far we will be taking the boat out to the lake for trials and then back to Baffin Bay Texas. Would like to get information on a new four blade prop for a 22 ft Showllwater boat.
by

Problem fixed: Motor would go into gear, propulsion.

Note first: We over thought the project. We have removed the lower unit every year since purchase to replace the water pump and housing. The boat is a shallow water boat and has occasionally been aground. 1. Remove cowling and remover the bolt that holds the shifting shaft to the linkage. 2. Removed the steering control tab, and all of the bolt on the lower unit, do not forget the bolt that is above the tab. 3. dropped the lower unit 4. read about the removal of the the main dive shaft from motor to lower unit ( this is where we got lost for a few minutes, we read that there was a pin in the lower portion on the bottom shaft, our thought that this was to be removed before shaft would come out, so we removed the bolts behind the prop and used a puller to remove. this is where we found the pinion gear broke in half, we then found the you did not hsve to open bottom to get shaft out, you just need a , not know the correct name for tool, but somthing to attach to shaft and not bend that allows for you to use a slide hammer the pop shaft from clamp below water pump. This is the best for a quick removal and reinstall .

evinrude 150hp 1995

Repair Difficulty
Medium
Repair Time
1 to 2 hours
Ordering my lower unit was a breeze. Shipping also emailed me to confirm your were shipping game the correct part. Received in timely manner.
by

Problem fixed: lower unit replacement

You need to remove your old shift rod after measuring it's length from the top of the initial. It should simply unscrew unless you have the 30 inch rod, they are two pieces an you'll need to separate the two to remove it. The upper shift rod gets separated from the lower and simply gets pushed into the new lower unit. Add a water pump assembly and you're back on the water.

by

Evinrude 175HP FICHT

Good. I wish there would have been more information with the part and that they would have told me to order the associated parts at the same time I ordered this part.
by

Customers Also purchased

Flat $3.95 Shipping on ALL parts orders

We offer shipping flat $3.95 shipping on ALL parts orders. (Complete Engines, Lower Units and Sterndrives excluded). In addition orders over $89 have reduced cost express shipping available in checkout.

shipping map shipping map legend

You can get a rough idea of standard transit times from the map above.