Bulk Tubing (20' - Cut to Length) 32-892024122
- Guaranteed fitment for 863 different models
- This is an OEM part manufactured by Mercury Marine
- Flat rate shipping starting at $4.95
- 30 day return policy
Product Description
Parts included in this kit
Please note: Some of the included items may not be available for purchase separately and won't be listed here.
| Name | SKU | Brand |
|---|---|---|
| (M6 x 44) Stud | 8161949 | Mercury Marine |
| Adjusting Screw (M6 x 55) | 814776 | Mercury Marine |
| Brass Pipe Plug | 328022 | Mercury Marine |
| Carrier Assembly | 812888A2 | Mercury Marine |
| Check Valve (Press-In) | 426232 | Mercury Marine |
| Dowel Pin | 43044 | Mercury Marine |
| Dowel Pin | 8128701 | Mercury Marine |
| Fitting | 19725 | Mercury Marine |
| Nut | 400212 | Mercury Marine |
| Nylon Adjusting Cap | 42942 | Mercury Marine |
| Plug-Pipe | 185981 | Mercury Marine |
| Thermostat Cover Gasket | 827284 | Mercury Marine |
| Valve-Check | 426585 | Mercury Marine |
Product Questions
There are no questions for this product. Ask a new question and receive an answer, directly from our support staff.
31 Product Reviews
1999 Force 75 hp
AMC CJ 7 Jeep V8 304 rebuild
- Repair Difficulty
- Easy
- Repair Time
- Less than 30 mins
- Repair Difficulty
- Medium
- Repair Time
- 2 to 4 hours
1998 Mercury 150 xr6
Mercury 225 efi
- Repair Difficulty
- Medium
- Repair Time
- 1 to 2 hours
Problem fixed: Bleed hoses splitting
Replaced bleed lines and added check valves that were missing in bleed lines.
75 hp merc 2 stroke
- Repair Difficulty
- Medium
- Repair Time
- More than 4 hours
Problem fixed: seized
Thanks Mr Crowley A suggestion. The 70-100+ HP Merc 2 stroke legs appear to be the same as the “Command Thrust” legs on the 4 stoke 60 hp etc. I have 2 75 HP 2007 two strokes, which are back working. 2 strokes are becoming very unpopular. Indeed they are being band from sale in this country and the EU and…. Mercury could but will not offer a 4 stoke upgrade kits, but cheap people like me would be interested since throwing away the legs, props, tilt motors cylinders, controls etc. seems a complete waste, even Un-Green! Crowley could offer conversion kits starting with reconditioned 4 stroke power heads. As for experiences. a f The enviroment. Unlike my yacht diesel which I consider a capital investment to be maintained and kept with available spare parts, I have always considered outboards to a consumer items. That in part is based on living in a first world country like Australia where everyone want to be a rent seeker or worse such as some lower less literate life form like a lawyer. It is easer to find a brain surgeon than an outboard mechanic. I have two 2007 75 hp two stroke Mercs on a catamaran. The problem One of them apparently seized. We dragged it out of the water and took it off to the place that sold the motors almost a decade ago. Not worth fixing. Too hard. Don’t sell Mercs any more, can sell you two new motors, was the response. Hmm might just go to the trouble of finding out what’s wrong with this thing, so I built a crane next to my jetty and took off the power head and quickly concluded that the bottom big end bearing had collapsed and bits of it were jammed between the top of the piston and the cylinder head. Apparently caused by a blocked carburettor jet, despite water separators filters etc. No fuel = no lubrication = …. A few gaskets and a new bearing was all that was required. No cylinder wall damage. Some tips on how to get this thing back together. Forget the manual’s instructions for getting the pistons back in the block. It might work if you took all the pistons off the crank shaft. Three bits of plastic drainage pipe slit with cable ties work as piston ring compression tools, which will fit in the block and its impossible to get a standard ring compression tool in the block. A couple of 8 mm bolts screwed into the flywheel and a bit of right angle works as a lifting tool.
Mercury 1998 150
Twin 1998 Mariner 225 Off Shore EFI 2-strokes
Customers Also purchased
Supersession Chain
| Name | SKU | Superceding SKU |
|---|---|---|
| Bulk Tubing (20' - Cut to Length) VIEWING THIS PRODUCT | 892024122 | CURRENT |
| Tubing (20 FEET | 99130122 | 892024122 |
| Economizer Hose | 5734 | 892024122 |
| Hose | 60580 | 99130122 |
| TUBING-6.0 INCHES | 9913022 | 99130122 |
| TUBING-24 INCH | 9913076 | 99130122 |
| TUBING-20.50 IN | 9913069 | 99130122 |
| HOSE-18 INCH | 9913064 | 99130122 |
| TUBING | 9913046 | 99130122 |
| TUBING | 99130 | 99130122 |
| TUBING-4.25 IN | 9913015 | 99130122 |
| TUBING | 9913019 | 99130122 |
| Tubing (26 Inch) | 9913078 | 99130122 |
| TUBING-7.50 IN | 9913028 | 99130122 |
| PUDDLE DRAIN HOSE | 9913030 | 99130122 |
| TUBING-8.75 INCH | 9913033 | 99130122 |
| TUBING-11.75 IN | 9913045 | 99130122 |
| TUBING-22 INCH | 9913072 | 9913076 |
| Hose | F9913046 | 9913046 |
| TUBING-18.50 IN | 9913065 | 9913069 |
| Fuel Line | 6058078 | 9913078 |
| Bleed Hose DRAIN (6 1/2") | 60584 | 6058078 |
Aftermarket Product Interchange
| Name | SKU | Price | Brand |
|---|---|---|---|
| Bleeder Hose | 18-8048 | - | Sierra Marine |