PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Troubleshooting [Self-Diagnosis] [2008]

Produits associés:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 2003 - 2005 200hp All
Yamaha International 2003 - 2005 225hp All
Yamaha International 2003 - 2005 200hp All
Yamaha Outboard 2003 - 2005 225hp All

Troubleshooting [Self-Diagnosis] [2008]
LIT-18616-02-76
Yamaha Marine

Self-diagnosis

Diagnosing the electronic control system

  1. Connect the special tools to the outboard motor as shown.

When performing this diagnosis, all of the electrical wires must be properly connected.

        Diagnostic test lead: YB-06795

  1. Start the engine and let it idle.

  2. Check the flash pattern of the diagnostic indicator to determine if there are any malfunctions.

  • Normal condition
    (no defective part or irregular processing is found)

  • Single flash is given every 4.95 seconds.
    (a): Light on, 0.33 second
    (b): Light off, 4.95 seconds

  • Trouble code indication
    Example: The illustration indicates code number 23.
    (a): Light on, 0.33 second
    (b): Light off, 4.95 seconds
    (c): Light off, 0.33 second
    (d): Light off, 1.65 seconds

  1. If a flash pattern listed in the diagnosis code chart is displayed, check the malfunctioning part according to the flash pattern.

When more than one problem is detected, the light of the diagnostic tester flashes in the pattern of the lowest numbered problem. After that problem is corrected, the light flashes in the pattern of the next lowest numbered problem. This continues until all of the problems are detected and corrected.

Code Symptom
1 Normal
13 Incorrect pulser coil signal
15 Incorrect engine temperature sensor signal
18 Incorrect throttle position sensor signal
19 Incorrect battery voltage
23 Incorrect intake air temperature sensor signal
28 Incorrect neutral switch signal
29 Incorrect intake air pressure sensor signal
37 Incorrect idle speed control signal
39 Incorrect oil pressure sensor signal
44 Incorrect engine stop lanyard switch signal
45 Incorrect shift cut switch signal
46 Incorrect thermoswitch signal
Share on social:

Produits associés