MULTI FUNCTION GAUGE SYSTEM CONNECTION
Select the connection method from the examples in the following pages and arrange the required wiring.
For setting up the multi-function gauge, refer to “INSTALLATION INSTRUCTION MANUAL” packed in the gauge.
T- Connector
T-Connectors must be connected to be a straight line of “T”s as shown in the illustration.
• Secure the T-connectors to a solid surface or to an existing wire harness, do not leave them free-floating.
• Do not overstress cables or connectors by using excessive force when tightening or pulling.
SINGLE ENGINE – SINGLE STATION
SINGLE ENGINE – DUAL STATIONS
DUAL ENGINES – SINGLE STATION
DUAL ENGINES – DUAL STATIONS
TRIPLE ENGINES – SINGLE STATION
TRIPLE ENGINES – DUAL STATIONS
QUADRUPLE ENGINES – SINGLE STATION
QUADRUPLE ENGINES – DUAL STATION
