PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Service Manual DF40, DF50 Removal Inspection Installation [147][Df40, Df50]

Produits associés:
Service Manual DF40, DF50 Removal Inspection Installation [147][Df40, Df50]
99500-87J08-01E
Suzuki Marine

THERMOSTAT


REMOVAL

  • Disconnect water hose (1) from thermostat cover.
  • Remove the four (4) bolts (2) securing the thermostat cover, then remove the cover (3) and thermostat (4).


INSPECTION

  • If salt deposits, corrosion, wear or other damage is found, clean or replace.

  • Thermostat operation
    Check thermostat opening temperature as follows :

  • Insert a length of thread between thermostat valve / body and suspend thermostat in a container filled with water.

  • Place thermometer in container and heat water.

    Observe water temperature when thermostat valve opens and releases thread.

Thermostat operating temperature
Standard : 48 – 52 °C (118 – 126 °F)


INSTALLATION
Installation is reverse order of removal with special attention to the following steps.

  • Assemble thermostat (1), gasket (2) and thermostat cover (3) to cylinder head block and secure with bolts.
Share on social:

Produits associés