PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Service Manual DF40, DF50 Ptt Motor Relay [293][Df40, Df50]

Produits associés:
Service Manual DF40, DF50 Ptt Motor Relay [293][Df40, Df50]
99500-87J08-01E
Suzuki Marine

SWIVEL BRACKET BUSH

The swivel bracket bush has been changed in shape.

TILLER HANDLE ASSY

The wire connector of the tiller handle assy has been changed to 16-pin connector.

PTT MOTOR RELAY

The PTT relays (for UP and for DOWN) have been incorporated and changed in shape.

In accordance with the change of PTT relay, the lead connector of PTT motor and lead grommet have been changed.

PTT MOTOR RELAY

INSPECTION

  1. Disconnect battery cable from battery.

  2. Disconnect all cables/lead wires from PTT relay.

  3. Check resistance between each two (2) lead wires.

Between “P” wire and “B” wire: 25 – 37 Ω
Between “Lbl” wire and “B” wire: 25 – 37 Ω

  1. Connect “R” wire to positive (+) terminal, and black wire to negative (-) terminal of 12 V battery.

Each operation test must be performed within 3 – 5 seconds to avoid overheat damage to the relay coil.

  1. Temporarily connect a jumper wire from the “P” lead wire to the battery positive + terminal, then check voltage between “G” wire and “B” wire.

Between “G” wire and “B” wire: 12 V (Battery voltage)

  1. Temporarily connect a jumper wire from the “Lbl” lead wire to the battery positive + terminal, then check voltage between “Bl” wire and “B” wire.

Between “Bl” wire and “B” wire: 12 V (Battery voltage)

  1. If inspection in step 3 and/or step 5, 6 fails, replace PTT relay.
Share on social:

Produits associés