PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Service Manual DF40, DF50 Principles Of Operation [179][Df40, Df50]

Produits associés:
Service Manual DF40, DF50 Principles Of Operation [179][Df40, Df50]
99500-87J08-01E
Suzuki Marine

TRIM/TILT “UP” CIRCUIT

The electric motor is operating in a clockwise direction. Check valve (A) will open, allowing oil to flow from the reservoir to the pump. Oil flow from the pump enters the spool valve, moving it to the left, opening the “down” pressure main check valve and returning oil from the upper cylinder chamber (plus oil from the reservoir) to the
pump. Pressure built up by the pump will then open the “up” pressure main check valve and oil will enter the lower cylinder chamber.

When trim motor stops, both the “DOWN” pressure main check valve and the “up” pressure main check valve will close to retain tilt/trim position.

When full trim/tilt “up” position is attained, sustained operation of the “up” relay will have no effect, as pump oil flow will be returned to the reservoir through the “up” relief valve.

TRIM/TILT “DOWN” CIRCUIT

The electric motor is operating in a counterclockwise direction. Check valve (B) will open, allowing oil to flow from the reservoir to the pump. Oil flow from the pump enters the spool valve, moving it to the right, thereby opening the “up” pressure main check valve. Oil from the lower cylinder chamber will go through the “up” pressure main check valve to the pump.

Pressure built up by the pump will open the “down” pressure main check valve and oil will enter the upper cylinder chamber. The piston will retract (move inward), which will tilt the outboard down. Oil in the lower cylinder chamber is returned to the pump through the “up” pressure main check valve.

When full “down” position is reached, continued operation of the “down” relay will have no effect, as pump oil flow will be returned to the reservoir through the “down” relief valve.

SHOCK ABSORBER CIRCUIT

(i) Shock valve
Should the lower unit strike an underwater object whilst in motion, the piston will rise abruptly, creating a sudden high impact pressure in the upper cylinder chamber. The shock valve will then open, allowing oil to flow into the area between the tilt ram piston and the free piston, thereby dampening (absorbing) the impact.

(ii ) Return valve
When the point of impact has passed, propeller thrust and motor weight will force the tilt ram piston back downwards. The oil from between the ram piston and the free piston is then expelled through the return valve before flowing into the upper cylinder chamber.

MANUAL RELEASE CIRCUIT (MANUAL VALVE)

Operation:Turn manual valve maximum two (2) full turns counterclockwise.

When the manual valve is loosened, oil will flow unimpeded (without resistance) through the internal pump tubes, thereby facilitating manual tilting or lowering of the outboard. To hold the engine in a selected position, the manual valve must be closed again.

THERMAL VALVE

The PTT system incorporates a thermal valve for protection of the internal components, should excessive downward force be exerted on the lower unit with the motor in a tilted position, or (in the case of an impact in reverse gear), the outboard clamp/swivel brackets and the boat transom.

Should the propeller strike an underwater object whilst in reverse gear, a build up of pressure will be induced in the lower cylinder chamber, whereby the outboard mounting bracket and/or the boat transom may sustain damage. To prevent this, the thermal valve will open to relieve the oil pressure, thereby softening the impact. Internal PTT circuits are protected, as the thermal valve will open to reduce oil pressure (caused by either hot climate or abnormally heavy usage).

Share on social:

Produits associés