PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Service Manual DF40, DF50 Pre-Programmed Value For Fail-Safe System [68][Df40, Df50]

Produits associés:
Service Manual DF40, DF50 Pre-Programmed Value For Fail-Safe System [68][Df40, Df50]
99500-87J08-01E
Suzuki Marine

FAIL-SAFE SYSTEM

The fail-safe system is closely related to the self-diagnostic system.

When an abnormality occurs in a sensor signal, the ECM ignores the out-of-range signal and assumes a pre-programmed value for the failed sensors.

This allows the engine to continue running under the fail-safe condition.

PRE-PROGRAMMED VALUE FOR FAIL-SAFE SYSTEM

FAILED ITEM PRE-PROGRAMMED VALUE
MAP sensor 1 • 319 – 475 mmHg (Correspond to approx. 750 – 4000 r/min) [NOTE 1]
CMP sensor • Fuel Injection:
1 simultaneous injection for all cylinders per 2 crankshaft rotations
• Ignition Timing:
Fixed at BTDC 5° ignition timing
Cylinder temp. sensor 60 °C (140 °F)
IAT sensor 45 °C (113 °F)
Exhaust manifold
temp sensor
60 °C (140 °F)

There is no back-up system for the ECM itself. The engine will stop if it has failed.

This value will change according to the current engine speed.

Share on social:

Produits associés