PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Service Manual DF40, DF50 Installation [131][Df40, Df50]

Produits associés:
Service Manual DF40, DF50 Installation [131][Df40, Df50]
99500-87J08-01E
Suzuki Marine

ASSEMBLY

(1) Wash, clean and then dry all disassembled parts.
(2) Apply thin coat of engine oil to inner and outer rotors, oil seal lip and inside surfaces of oil pump case and plate.
(3) Install outer and inner rotor to pump case.

(4) Install outer plate.

Tighten six (6) screws securely.

After mounting the outer plate, check to be sure that each rotor turns smoothly by hand.

INSTALLATION

Installation is reverse of removal with special attention to following steps.

  1. Check for proper timing chain installation. (see page 6-20)

  2. Install two (2) dowel pins to cylinder block.

Before fitting the pump case, oil the oil seal lip.

  1. Apply sealant to areas as shown in figure.

99000-31140 : Suzuki Bond 1207B

  1. Apply a continuous bead of sealant to oil pump case mating surface as shown in figure.

99000-31140 : Suzuki Bond 1207B

  1. Install oil pump case to cylinder block and tighten seven (7) bolts securely.

• When installing oil pump case be sure position of oil pump inner rotor matchs with crankshaft.
• Tighten bolts in the indicated order.

  1. Install dowel pin and gasket to oil pump case.
  2. Apply grease to oil seal lip.

99000-25161 : Water Resistant Grease

  1. Install under oil seal housing and tighten bolts.
Share on social:

Produits associés