PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Our warehouses are closed on Thursday and Friday, November 26th and 27th. Happy Thanksgiving!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Service Manual DF40, DF50 Electronic Fuel Injection System [232][Df40, Df50]

Produits associés:
Service Manual DF40, DF50 Electronic Fuel Injection System [232][Df40, Df50]
99500-87J08-01E
Suzuki Marine

ELECTRONIC FUEL INJECTION SYSTEM

FUEL INJECTION TIMING CHART

  • Fuel injection timing is always fixed at BTDC 425° on exhaust stroke.
  • The fuel injection time duration (amount) is varied by the condition of engine running.
  • Angles indicated in the following chart show CRANKSHAFT angle.

CONTROL MODE

BEFORE START :

When the ignition switch is turned “ON”, the ECM receives a MAP sensor signal, indicating the static barometric pressure of the intake manifold, which is used to compensate the fuel injection map for altitude.

WHEN CRANKING :

Fuel is simultaneously injected to all cylinders every time any piston is positioned at compression stroke.

AFTER START (FAST-IDLE FUNCTION):

The fuel injection amount is controlled to increase until the timer, set according to cylinder temperature at the time of engine start, expires.

WHEN IDLING / TROLLING :

The fuel injection amount is controlled to maintain a stable engine speed at the specified idle / trolling rpm.

WHEN ACCELERATING :

The fuel injection amount is controlled to increase.

WHEN DECELERATING :

The fuel injection amount is controlled to decrease.
The fuel injection is also cut off on very rapid engine deceleration.

Share on social:

Produits associés