PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Service Manual DF40, DF50 Cylinder Head Assembly [136][Df40, Df50]

Produits associés:
Service Manual DF40, DF50 Cylinder Head Assembly [136][Df40, Df50]
99500-87J08-01E
Suzuki Marine

CYLINDER HEAD ASSEMBLY

REMOVAL

(Cylinder head / valve / camshaft)

Prior to removing cylinder head :

  • Remove the power unit. (see page 6-3 to 6-6)

  • Remove the timing chain. (see page 6-15 to 6-16)

  1. Remove the bolts securing the camshaft housing to cylinder head, then remove each camshaft housing.

For ease of assembly, note position of each individual camshaft housing.

  1. Remove intake and exhaust camshafts.

  1. Loosen ten (10) cylinder head bolts in the order indicated in figure and remove them.

  2. Remove cylinder head assembly and head gasket.

Use a special tool (10mm deep socket wrench) when loosening the cylinder head bolts.

TOOL 09919-16010 : Deep socket wrench (10 mm)

INSTALLATION

Installation is reverse order of removal with special attention to the following steps.

Do not re-use gasket. Always use a new gasket.

  1. Insert the dowel pins and place a new cylinder head gasket into position on the cylinder.
Share on social:

Produits associés