PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Service Manual DF40, DF50 Crankcase [358][Df40, Df50]

Produits associés:
Service Manual DF40, DF50 Crankcase [358][Df40, Df50]
99500-87J08-01E
Suzuki Marine

CRANKCASE BOLT

The surface treatment of the crankcase bolt has been changed. The tightening of the case bolts is performed in three stages. However, with this change effected, the torque specification for the second tightening stage has been changed. The torque specifications for the first and the final tightening remains unchanged.

Crankcase bolt tightening torque

2nd step 10 mm 37 N·m → 23 N·m

2nd step 8 mm 20 N·m → 13 N·m

CRANKCASE TO CYLINDER

  1. Clean mating surface of cylinder and crankcase.

  2. Apply sealant to mating surface of crankcase as shown.

Apply sealant to mating surface only.
Do not allow sealant to contact surface of bearing.

99000-31140: Suzuki Bond 1207B

  1. Install four (4) dowel pins (1).

  1. Install crankcase to cylinder.

  2. Apply engine oil to crankcase bolts.

  3. Tighten crankcase bolts in three (3) steps following the order indicated below.

After tightening crankcase bolts, check to be sure that crankshaft rotates smoothly when turned by hand.

Crankcase bolt

1st step 8 mm 5 N·m (0.5 kg-m, 3.5 lb.-ft.)

        10 mm 10 N·m (1.0 kg-m, 7.0 lb.-ft.)

2nd step 8 mm 13 N·m (1.3 kg-m, 9.5 lb.-ft.)

        10 mm 23 N·m (2.3 kg-m, 16.5 lb.-ft.)

Final step 8 mm 25 N·m (2.5 kg-m, 18.0 lb.-ft.)

        10 mm 46 N·m (4.6 kg-m, 33.5 lb.-ft.)

Share on social:

Produits associés