PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Service Manual DF40, DF50 Assembly [106][Df40, Df50]

Produits associés:
Service Manual DF40, DF50 Assembly [106][Df40, Df50]
99500-87J08-01E
Suzuki Marine

ASSEMBLY

Assembly is reverse order of disassembly paying special attention to the following steps.

Float / Float pin

Install float and float pin.

After assembling, check for smooth and free float movement.

Fuel pressure regulator

Install fuel pressure regulator and tighten screw securely.

Apply fuel to O-ring before installing regulator.

Separator cover / Separator case

Apply Suzuki Bond evenly to only the outside mating surface of separator cover as shown.

99000-31140 : Suzuki Bond 1207B

• Clean mating surfaces before applying bond.
• Do not apply bond to o-ring, groove and inside mating surface.

Install separator case and tighten screws securely.

Separator cover and case are a set.
Make sure paint marks on both items are matched when assembling.

Share on social:

Produits associés