PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Service Manual DF200AP Power Head[Engine Control[Diagnostic Information And Procedures][Self-Diagnostic Code “5 – 1” Vvt Advance]]

Produits associés:
Service Manual DF200AP Power Head[Engine Control[Diagnostic Information And Procedures][Self-Diagnostic Code “5 – 1” Vvt Advance]]
99500-96L10-01E
Suzuki Marine

Self-Diagnostic Code “5 — 1” VVT Advance

Wiring Diagram

1. OCV

Troubleshooting

Step 1

  1. With the main switch “OFF", disconnect the connector from OCV.

  2. Check the voltage at “Gr" wire terminal with the main switch “ON”.

Is the voltage 12 V (battery voltage)?

Yes Go to step 2.

No

  • Power circuit open.
  • ”Gr” wire shorted to “Br/W” wire or ground circuit.
  • If the wiring and connection is OK, substitute known-good ECM and recheck.

Step 2

  1. Inspect OCV and OCV gasket filter condition.
    Refer to “OCV (Oil Control Valve) Inspection" in Section 1C (Page 1C-21).

Is the result 0K?

Yes

  • Poor OCV connection, intermittent trouble or a faulty ECM.
  • Clogged OCV oil passage.

No Faulty OCV.

Share on social:

Produits associés