PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Service Manual 5009009_115–200 HP 60°V - V4 AA-AE - V6 AA Midsection [Extensions Service V4 Models]

Produits associés:
Service Manual 5009009_115–200 HP 60°V - V4 AA-AE - V6 AA Midsection [Extensions Service V4 Models]
5009009
BRP Marine

EXTENSION SERVICE – V4 MODELS

Removal

Remove six screws retaining extension.

  1. Screws

Remove extension.

Remove grommets and seal.

Installation

Apply Adhesive 847 to the shift rod and water tube flange of the extension. Install new grommets.

Apply Triple-Guard grease to outer grommet surfaces.

Apply Adhesive 847 to the bottom flange of the extension. Install a new seal.

Apply Triple-Guard grease to outer seal surface.

  1. Adhesive 847
  2. Triple-Guard grease

Install extension with six screws and tighten to a torque of 18 to 20 ft lb. (24 to 27 N•m).

STERN BRACKET

Stern Bracket Disassembly

Before servicing the stern bracket:

  • Remove gearcase. Refer to Gearcase GEARCASE REMOVAL AND INSTALLATION on p. 294.
  • Remove powerhead. Refer to Powerhead POWERHEAD REMOVAL on p. 220.
  • Remove exhaust housing. Refer to Exhaust Housing Exhaust Housing Removal on p. 268.
  • Remove power trim/tilt unit. Refer to TRIM AND TILT section.

Remove and discard steering shaft locknut.

Remove the lower mount bracket and keeper.

Share on social:

Produits associés