PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Service Manual 5008740_200-300 HP 90 ° V Electrical And Ignition [Ignition Coil Servicing]

Produits associés:
Service Manual 5008740_200-300 HP 90 ° V Electrical And Ignition [Ignition Coil Servicing]
5008740
BRP Marine

IGNITION COIL SERVICING

Ignition Coil Removal

Remove spark plug lead from ignition coil.

Disconnect ignition coil electrical connector.

Remove two ignition coil retaining screws.

Do not lose the rubber washers between coil and bracket.

  1. Screws
  2. Connector

Ignition Coil Bracket Removal

Remove all ignition coils from bracket.

Remove spark plug lead ground screw.

  1. Ground screw

Remove four screws and bracket.

  1. Screws

Ignition Coil Bracket Installation

Install bracket with four screws. Tighten screws to a torque of 60 to 84 in. lb. (7 to 9.5 N·m).

Install spark plug leads with ground screw. Tighten screw securely.

Ignition Coil Installation

Connect ignition coil electrical connector. Place electrical connector on its retainer.

Install one rubber washer on each screw . Inst all screw through ignition coil. Install remaining rubber washers on screws between coil and bracket.

  1. Electrical connector
  2. Rubber washers

Install coil with washers on bracket.

Tighten screws to a torque of 60 to 84 in . lb. (7 to 9.5 N·m).

Install spark plug lead on ignition coil.

Share on social:

Produits associés