PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Service Manual 5007215_Evinrude E-TEC 200-250 HP Cooling System [Pressure Relief Valve Servicing]

Produits associés:
Service Manual 5007215_Evinrude E-TEC 200-250 HP Cooling System [Pressure Relief Valve Servicing]
5007215
BRP Marine

PRESSURE RELIEF VALVE SERVICING

The pressure relief valve assembly should be serviced at the same time as the thermostats.

Disassembly

Remove hose clamps and hoses from pressure valve.

  1. Hoses

Remove screws securing the bracket to powerhead. Remove the pressure valve housing.

Remove the bracket and the cap from the housing. Remove the pressure valve assembly.

  1. Bracket
  2. Cap

Inspection

Inspect all components for cracks, heat damage, or signs of corrosion. Replace damaged components. Clean all debris from pressure relief valve components.

Assembly

Assembly is essentially the reverse of disassembly.
Pay close attention when performing the following additional tasks.

Torque bracket and cap screws to 60 to 84 in. lbs. (7 to 9.5 N-m).

Install valve on powerhead. Torque nuts to 60 to 84 in. lbs. (7 to 9.5 N-m).

Install hoses and secure with clamps.

Share on social:

Produits associés