PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Service Manual 250-300 HP 3.4 L E-TEC Engine Cover Service [Lower Cover Service]

Produits associés:
Service Manual 250-300 HP 3.4 L E-TEC Engine Cover Service [Lower Cover Service]
5007533
BRP Marine

Lower Cover Removal

Remove lower engine cover screws.

  1. Lower cover screws 004122

Loosen port side cover slightly, and disconnect trim/tilt switch connector. Then, remove port and starboard covers.

Lower Cover Installation

Install the lower engine covers and tighten all screws to a torque of 24 to 36 in. lbs. (3 to 4 N·m).

  1. Lower cover screws 004122

Connect trim/tilt switch connector.

005246

Latch Handle Installation

Apply a light coat of Triple-Guard grease to latch handle shaft. Insert handle into lower cover.

  1. Triple-Guard grease 006827

Apply Ultra-Lock to screw threads. Place spring washer and hook into position and tighten screw to a torque of 180 in. lbs. (20 N·m).

006821

Trim Switch Installation

Place switch into position through cover.

006746

Install nut on switch. Tighten nut to a torque of 10 to 16 in. lbs. (1 to 2 N·m).

006747

Install electrical connector. Refer to CONNEC- TOR SERVICING on p. 156.

006748

Share on social:

Produits associés