PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Service Manual 25-30 HP E-TEC Manual Starter [Recoil Starter Cleaning And Inspection]

Produits associés:
Service Manual 25-30 HP E-TEC Manual Starter [Recoil Starter Cleaning And Inspection]
5007802
BRP Marine

MANUAL STARTER

Turn housing over and tap on bench to remove spring.

Keep fingers away from uncoiling spring.
Do NOT remove spring with housing facing up. Do NOT lift spring out of housing by hand or with pliers.
Spring is under tension and will cause injury if accidentally released.

Remove two screws. Remove the rope guide.

  1. Screws

RECOIL STARTER CLEANING AND INSPECTION

Wash metal components in solvent and dry with compressed air.

Inspect the rewind spring for broken end loops and weak tension.

Examine the starter pawl for wear.

Inspect the starter components for wear. Replace as necessary.

Inspect starter rope. Replace rope if frayed. Cut new rope 80 in. (203 cm) in length. Fuse ends of rope to a length of 1/2 in. (12 mm).

Examine the pulley and the starter housing. Look for sharp edges and rough surfaces that could fray the starter rope. File and polish to remove.

Examine the starter. Replace any worn or damaged parts.

Share on social:

Produits associés