PREPARE FOR WINTER: 10-50% discount on all OEM parts!

Unless prohibited by manufacturer. Does not include aftermarket or Crowley Marine branded products. Priced as marked.

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Service Manual 200-300 HP E-TEC Gearcase [Gearcase Housing Inspection]

Produits associés:
Service Manual 200-300 HP E-TEC Gearcase [Gearcase Housing Inspection]
5007820
BRP Marine

Gearcase Housing Inspection

Remove propeller shaft assembly from gearcase.


006839

Water Intake Screens

Remove and clean water intake screens. Replace if damaged.


006886

  1. Water intake screen

Thoroughly clean gearcase housing to remove all dirt and debris prior to inspection. Inspect pinion bearing and forward thrust surface of gearcase housing.

Use Gearcase Alignment Gauge Kit, P/N 5006349 to check the condition of gearcase housing prior to reassembly. Refer to instructions provided with kit. Use additional Gauging Head as follows:

  • P/N 5007750, for “L2” Type gearcase housings
  • P/N 5007749, for “M2” Type gearcase housings


006787

IMPORTANT: DO NOT force gauging shaft into alignment hole. Shaft MUST slide easily into hole of gauging head. If shaft does not slide into hole, gearcase housing is damaged and must be replaced.


004347

  1. Gauging shaft
Share on social:

Produits associés