Preface
PREFACE
This kit converts a 1995 (EO) and newer 9.9/15 four-stroke tiller model to remote shift and throttle operation.
[1]
Contents of Kit
| Ref. | Name of Part | Qty. |
|---|---|---|
| 1 | Connector | 1 |
| 2 | Shift Link | 1 |
| 3 | Spring Clip | 3 |
| 4 | Retainer | 1 |
| 5 | Screw | 1 |
| 6 | Grommet | 1 |
Installation of this kit involves procedures described in detail in your Service Manual.
Remove stop switch clip to prevent accidental starting.
Remove lower engine covers.
[2]
Thread connector (1) onto shift link (2) until tight.
[3]
Install shift link on shift lever and retain with spring clip **(3).
Install remote control cables as described in service manual.
[4]
Install spring clips (3) to secure cables.
[5]
Install retainer (4) and screw (5). Tighten screw to 60-84 in. lbs. (7-9 Nm).
[6]
Install lower engine covers. then install new grommet (6) on cables and position it in cover.
Verify that controls work as intended for safe operation.