PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Power Unit [Flywheel Magneto And Magneto Base] [2002]

Produits associés:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 1997 - 2003 15hp All
Yamaha Outboard 1997 - 2003 9.9hp All
Yamaha International 2001 - 2003 9.9hp All
Yamaha International 2001 - 2003 15hp All

Power Unit [Flywheel Magneto And Magneto Base] [2002]
LIT-18616-01-65
Yamaha Marine

EXPLODED DIAGRAM

REMOVAL AND INSTALLATION CHART

Step Procedure/Part name Q’ty Service points
FLYWHEEL MAGNETO AND MAGNETO BASE REMOVAL Follow the left "Step" for removal.
Recoil starter assembly Refer to the "RECOIL STARTER" section.
1 Nut 1
2 Plane washer 1
3 Flywhee 1
4 Woodruff key 1
5 Bolt (with washer) 2
6 Charge coil 1
7 Collar 2
8 Bolt (with washer) 2
9 Lighting coil 1
10 Collar 2
11 Magneto base plate 1
12 Pulser coil assembly 1
Reverse the removal steps for installation.

Service points

Flywheel magneto removal

  1. Remove and install:
    • Flywheel nut

Flywheel holder:
YB-06139/90890-06522
[A] For USA and CANADA
[B] Except for USA and CANADA

CAUTION: The major load should be carried in the direction of the arrows. If not, the holder may easily slip off.

  1. Remove:
    • Flywheel magneto

Flywheel puller: YB-06117/90890-06521

[A] For USA and CANADA
[B] Except for USA and CANADA

CAUTION:
• Keep the nut side flush with the crankshaft end until the flywheel comes off the
tapered portion of the crankshaft.
• To prevent damage to the engine or tools,screw in the flywheel magneto- puller set bolts evenly and completely so thatthe puller plate is parallel to the flywheel

Share on social:

Produits associés