PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Periodic Inspection And Adjustment [Lower Unit:Bracket Unit] [1996]

Produits associés:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 1996 150hp All
Yamaha Outboard 1996 175hp All
Yamaha Outboard 1996 200hp All
Yamaha Outboard 1996 225hp All
Yamaha Outboard 1996 250hp All

Periodic Inspection And Adjustment [Lower Unit:Bracket Unit] [1996]
LIT-18616-01-41
Yamaha Marine

LOWER UIMIT/BRACKET UNIT

Pressure tester: YB-03595/90890-06762

  • Apply the specified pressure

Pressure: 100 kPa (1.0 kg/cm2,14.2 psi)

  • Check that the pressure is held as specified for 10 seconds.

NOTE:
Do not over-pressurize. Excess pressure may cause the air to leak out.

BRACKET UNIT

Cowling hook adjustment

  1. Inspect:
  • Cowling lock and release
    Weak engagement -> Adjust

Adjustment steps:

  • Remove the top cowling.
  • Loosen the bolts by approximately a quarter turn.
  • Tap the end of the hook to make an approximate adjustment.

Moving the hook towards the seal -> Loosen the cowling.

Moving the hook away from the seal -> Tighten the cowling.

  • Tighten the bolts
Share on social:

Produits associés