PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Periodic Inspection And Adjustment [General] [1996]

Produits associés:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 1996 150hp All
Yamaha Outboard 1996 175hp All
Yamaha Outboard 1996 200hp All
Yamaha Outboard 1996 225hp All
Yamaha Outboard 1996 250hp All

Periodic Inspection And Adjustment [General] [1996]
LIT-18616-01-41
Yamaha Marine

Anode

  1. Inspect:
  • Anode
  • Trim tab
    Scale -»Clean.
    Oil/grease ->Clean.
    Wear/Excessively consumed ->Replace.

Do not oil, grease or paint the anode, or the function of the sacrificial anode will be spoiled.

Battery

Battery electrolyte is poisonous and dangerous, causing severe burns, etc. It contains sulfuric acid. Avoid contact with skin, eyes, or clothing.
Antidote:
EXTERNAL: Flush with water.
INTERNAL: Drink large quantities of water or milk. Follow with milk of magnesia, beaten egg, or vegetable oil. Call physician immediately.
EYES: Flush with water for 15 minutes and get prompt medical attention.
Batteries produce explosive gases: Keep sparks, flame, cigarettes, etc. away. Ventilate when charging or using in a closed space. Always wear eye protection when working near batteries.
KEEP OUT OF REACH OF CHILDREN.

• Batteries vary from manufacturer to manufaturer. Therefore the following procedures may not always apply. Consult your battery manufacturer's instructions.
• Disconnect the black negative lead first to prevent the risk of shorting.

  1. Insapect
  • Battery fluid level
  • Battery fluid specific gravity

Spark plug

park plug

  1. Inspect:
  • Electrode (1)
    Wear/Damaged -> Replace.
  • Insulator color (2)
    Distinctly different color ->
    Check the engine condition.

Color guide:
Medium to light tan color:
Normal
Whitish color:

  • Lean fuel mixture
  • Plugged fuel mixture
  • Air leak
  • Wrong setting
    Blackish color:
  • Overly rich mixture
  • Electrical malfunction
  • Excess oil used
  • Defective spark plug

  1. Clean:
  • Spark plug
    Clean the spark plug with a plug cleaner or wire brush.
  1. Measure:
  • Spark plug gap (a)
    Out of specification -> Alter gap

Spark plug gap:
0.9 ~ 1.0 mm (0.035 ~ 0.039 in)

  1. Tighten:
  • Spark plug

Spark plug:
25 Nm (2.5 m • kg, 18 ft • lb)

• Before installing a spark plug, clean the gasket surface and plug surface. Also it is suggested to apply a thin film of Anti Seize Compound to the spark plug threads to prevent future thread seizure.
• If a torque wrench is not available, a good estimate of the correct torque is a further 1/4 to 1/2 turns (£) on finger tightened (a) spark plug.

Grease points

  1. Apply:
  • Water resistant grease
Share on social:

Produits associés