PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Owner's Manual DF40, DF50 Motor Installation

Produits associés:
Owner's Manual DF40, DF50 Motor Installation
99011-87J09-03A
Suzuki Marine

MOTOR INSTALLATION

Do not overpower your boat. Never install an outboard motor with horsepower exceeding the manufacturer’s recommended maximum horse power (listed on the boat “Certification Plate”).
Excessive horsepower will have an adverse effect on hull safety and may cause operating/handling difficulties.
The boat may also sustain stress and hull damage. It is against federal regulations for any marine dealer to service a motor that exceeds the recommended maximum horsepower for your boat.
Contact your authorized Suzuki Marine Dealer if you are unable to locate the hull “Certification Plate”.

Suzuki strongly recommends that you have your outboard motor, controls and gauges installed by your authorized Suzuki Marine Dealer. He has the tools, the facilities and the know-how.

Failure to have your outboard motor and associated controls and gauges properly installed can result in personal injury or damage.

BATTERY INSTALLATION

BATTERY INSTALLATION

Suzuki recommends use of a high quality battery for this engine, meeting these minimum requirements:

TYPE MARINE
COLD CRANK AMPS (CCA) 389 Amperes or over
RESERVE CAPACITY (RC) 115-minutes or over
AMP HOUR 12 Volt, 70 AH or over

Secure the battery in a dry area of the boat, away from vibration.

To hook up the battery, first connect the red lead from the motor to the positive battery terminal, then connect the black lead to the negative battery terminal.

To remove the battery, first disconnect the black lead from the negative terminal, then disconnect the red lead from the positive terminal.

Connecting and disconnecting the battery as described above will help minimize the chance of creating an accidental short circuit and sparks.

Share on social:

Produits associés