PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Owner's Manual DF2.5 Storage Procedure

Produits associés:
Owner's Manual DF2.5 Storage Procedure
99011-97J70-03B
Suzuki Marine

STORAGE PROCEDURE

MOTOR STORAGE

When storing your motor for a long period of time (for example, at the end of the boating season), it is recommended that you take your motor to your authorized Suzuki Marine Dealer. However, if you choose to prepare the motor for storage yourself, follow the procedure outlined below:

  1. Change the gear oil as outlined in the GEAR OIL section.

  2. Change the engine oil as outlined in the ENGINE OIL section.

  3. Add a fuel stabilizer to the fuel tank according to the instructions on the stabilizer can.

  4. Flush the water passages in the motor thoroughly. Refer to the FLUSHING THE WATER PASSAGES section.

  5. Run the engine at about 2500 r/min in neutral for five minutes to distribute the stabilized fuel through the engine.

  6. Stop the engine.

  7. Turn the fuel cock lever to the right.

  1. Tighten the air-vent screw on the fuel filler cap of the built-in tank.

  2. Lubricate all other specified parts. Refer to the LUBRICATION section. Spray entire powerhead with a rust preventative (not a penetrating oil product).

  3. Apply a coat of automotive wax on the external finish of the motor. If paint damage is evident, apply touch up paint before waxing.

  4. Store the motor in an upright position in a dry, well-ventilated area. Select an area with constant temperature to avoid corrosion caused by condensation. Do not store next to furnaces, heaters, etc.

When the engine is running, there are many moving parts that could cause severe personal injury.
When the engine is running, keep your hands, hair, clothing, etc., away from the engine.

Severe engine damage can occur in as little as 15 seconds if the engine is started without supplying water to the cooling system.
Never start the motor without supplying water to the cooling system.

Share on social:

Produits associés