PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

OE 2012 Evinrude Portable Outboards Installation & Predelivery Guide (P-N 5008855) - Technical Specifications Steering Systems [Outboard Installation]

Produits associés:
OE 2012 Evinrude Portable Outboards Installation & Predelivery Guide (P-N 5008855) - Technical Specifications Steering Systems [Outboard Installation]
5008855
BRP Marine

Mechanical Cables

All Evinrude outboards equipped with tilt tubes are compatible with mechanical steering systems that meet ABYC Standard P-17. Single-cable mechanical steering systems can be used on single or dual-outboard installations if an ABYC-approved
steering link is used.
Extend the steering cable and lubricate the inner core before installation.

ABYC-approved mechanical steering cable.

IMPORTANT: Install steering cable through tilt tube before mounting outboard on transom. Tighten nut securely.

Use the correct drag link to allow full steering travel:

Model Drag Link
9.8 HP P/N 5040355
15 HP P/N 5040800

Install steering cable wiper nut on tilt tube. Connect the drag link to the steering bracket with the provided hardware as shown. Tighten drag link
nuts to 20 ft. lbs. (27 N·m).

9.8 HP Models

  1. Steering bracket
  2. Drag link connection
  3. Drag link nut

15 HP Models

  1. Steering bracket
  2. Drag link connection
  3. Drag link nuts
Share on social:

Produits associés