PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Lower Unit [Lower Unit(F50:F50A)] [2004]

Produits associés:

Applicable Models

Model group Year Model Serial
Yamaha International 2004 60hp All
Yamaha Outboard 2004 60hp All

Lower Unit [Lower Unit(F50:F50A)] [2004]
LIT-18616-FT-60
Yamaha Marine

Lower unit

No. Part name Q'ty Remarks Tightening torues
Stage N-m kgf-m ft-lb
1 Lower unit 1
2 Plastic tie 1 Not reusable
3 Hose 1
4 Check screw 1 7 0.7 5.1
5 Gasket 2 Not reusable
6 Bolt 4 M10 x 40 mm 40 4.0 29
7 Drain screw 1 7 0.7 5.1
8 Dowel pin 2
9 Bolt 1 M8 x 35 mm
10 Anode 1
11 Bolt 1
12 Thrust washer 1
13 Propeller 1
14 Washer 1
15 Washer 1
16 Cotter pin 1 Not reusable
17 Propeller nut 1 35 3.5 25
18 Trim tab 1
19 Bolt 1 M8 x 20 mm

Removing the lower unit

  1. Drain the gear oil. For draining procedures, see Chapter 3, “Replacing the gear oil.”

  2. Set the gearshift to the neutral position,and place a block of wood between the anti-cavitation plate and propeller to keep the propeller from turning, and then remove the propeller nut and propeller

WARNING
Do not hold the propeller with your hands when loosening or tightening it. Be sure to remove the battery leads from the batteries and the engine stop lanyard switch. Put a block of wood between the cavitation plate and propeller to keep the propeller from turning.

  1. Disconnect the speedometer hose (1).

  2. Mark the trim tab (2) at the area shown, and then remove it.

  1. Loosen the bolts, and then remove the lower unit from the upper case.

Share on social:

Produits associés