PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Lower Unit [Forward Gear And Drive Shaft] [1998]

Produits associés:

Applicable Models

Model group Year Model Serial
Yamaha International 1998 25hp All
Yamaha Outboard 1998 25hp All

Lower Unit [Forward Gear And Drive Shaft] [1998]
LIT-18616-01-77
Yamaha Marine

EXPLODED DIAGRAM

REMOVAL AND INSTALLATION CHARTCHART

Step Procedure/Part name Q'ty Service points
FORWARD GEAR AND DRIVE
SHAFT REMOVAL
Propeller shaft assy.
Follow the left "Step" for removal.
1 Pinion gear 1
2 Drive shaft 1
3 Forward gear
(with the tapered roller bearing)
1
4 Drive shaft bearing outer race 2
5 Pinion gear shim 1 set
6 Drive shaft sleeve 1
7 Drive shaft bearing 1

EXPLODED DIAGRAM

REMOVAL AND INSTALLATION CHART

Step Procedure/Part name Q'ty Service points
8 Needle bearing 1
9 Tapered roller bearing outer race 1
10 Forward gear shim 1 set
Reverse the removal steps for installation.

SERVICE POINTS

Forward and reverse gear disassembly

  1. Remove:

    • Pinion gear nut

  Drive shaft holder:   YB-06079-A/90890-06517

  Pinion nut holder:   YB-06078/90890-06505**

  1. Remove:

    • Pinion gear

    • Forward gear
      (with the tapered roller bearing)

  1. Remove:

    • Drive shaft bearing outer race

    • Pinion gearshim(s)

    Slide hammer set (1):   YB-06096

    Stopper guide plate (2):   90890-06501

    Bearing puller (3):   90890-06535

    Stopper guide stand (4):   90890-06538

    [A] For USA and CANADA

    [B] Except for USA and CANADA

Forward gear disassembly

  1. Disassemble:

    • Forward gear
      (from the tapered roller bearing)

    Bearing separator:   YB-06219/90890-06534

Drive shaft disassembly

  1. Remove:

    • Drive shaft bearing

    Bearing separator (1):   YB-06219/90890-06534

    Bearing inner race installer (2):   90890-06643

    [A] For USA and CANADA

    [B] Except for USA and CANADA

Lower case disassembly

  1. Remove:

    • Needle bearing

    Driver rod (1):   YB-06229/90890-06602

    Needle bearing attachment (2): YB-06082/90890-06615

  1. Remove:

    • Tapered roller bearing outer race

    • Forward gear shim(s)

    Slide hammer set:   YB-06096

    Slide hammer handle:   90890-06531

    Bearing outer race puller:   90890-06523

    [A] For USA and CANADA

    [B] Except for USA and CANADA

Forward gear assembly

  1. Install:

    • Tapered roller bearing (to the forward gear)

    Driver rod:   YB-06071/90890-06606

    Ball bearing attachment: YB-06276-B/90890-06659

    [A] For USA and CANADA

    [B] Except for USA and CANADA

Drive shaft assembly

  1. Install:

    • Drive shaft bearing

    Bearing separator (7): YB-06219

    Bearing inner race installer (2):   90890-06643

    [A] For USA and CANADA

    [B] Except for USA and CANADA

CAUTION:

Do not strike the center race or rollers of the bearing. Contact should be made only with the inner race.

Lower case assembly

  1. Install:

    • Needle bearing

    Needle bearing position (a):   185 - 186 mm (7.28 - 7.32 in)

    Driver rod (1):   YB-06229/90890-06602

    Needle bearing plate (2):   YB-06231

    Needle bearing attachment 3):   YB-06082/90890-06615

    Bearing depth plate (4):   90890-06603

    [A] For USA and CANADA

    [B] Except for USA and CANADA

NOTE:

Install the drive shaft needle bearing with the manufacturer's marks (b) facing up.

  1. Install:

    • Forward gear shim(s)

    • Tapered roller bearing outer race

Driver rod:   YB-06071/90890-06605

Bearing outer race attachment:   YB-06085/90890-06625

Forward gear and drive shaft installation

  1. Install:

    • Pinion gear shim(s)

    • Drive shaft bearing outer race

Driver rod:   YB-06071/90890-06606

Bearing outer race installer:   90890-06167/90890-06628

  1. Install:

    • Forward gear (with the tapered roller bearing)

    • Pinion gear

    • Pinion gear nut

    Pinion gear nut:   50 Nm (5.0 m • kg, 36 ft • lb)

    Pinion nut holder:   YB-06078/90890-06505

    Drive shaft holder:   90890-06079-A/90890-06517

Share on social:

Produits associés