PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Lower Unit [Drive Shaft Housing] [1996]

Produits associés:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 1996 150hp All
Yamaha Outboard 1996 175hp All
Yamaha Outboard 1996 200hp All
Yamaha Outboard 1996 225hp All
Yamaha Outboard 1996 250hp All

Lower Unit [Drive Shaft Housing] [1996]
LIT-18616-01-41
Yamaha Marine

EXPLODED DIAGRAM

REMOVAL AND INSTALLATION CHART

Step Procedure/Part name Q'ty Service points
DRIVE SHAFT REMOVAL Follow the left "Step" for removal
Propeller shaft housing Refer to "PROPELLER SHAFT HOUSING REMOVAL" section.
1 Pinion gear 1
2 Drive shaft housing 1
3 Pinion gear shim •
4 Thrust bearing 1
5 Drive shaft 1
6 Forward gear assembly 1
7 Reverse gear assembly 1 Counterrotation model
8 Thrust bearing 1
Reverse the removal steps for installation

•: As required

SERVICE POINTS

Drive shaft removal and installation

  1. Loosen and tighten:
    • Pinion nut

Drive shaft holder: YB-06201/90890-06520
Pinion nut holder: 90890-06505

Pinion gear inspection

  1. Inspect:
    • Tooth
    • Dog
    Wear/Damage -> Replace.

Drive shaft inspection

  1. Inspect:
    • Drive shaft
    Wear/Damage->Replace.

EXPLODED DIAGRAM

REMOVAL AND INSTALLATION CHART

Step Procedure/Part name Q'ty Service points
DRIVE SHAFT HOUSING DISASSEMBLY Follow the left "Step" for removal.
Drive shaft Refer to "DRIVE SHAFT REMOVAL" section.
1 Oil seal cover 1
2 Oil seal 2
3 Needle bearing 1
4 O-ring 1
5 Drive shaft housing 1
Reverse the removal steps for installation.

SERVICE POINTS

Drive shaft housing disassembly

  1. Remove:
    • Needle bearing

Needle bearing attachment: YB-06196/90890-06610
Driver rod: YB-06071 /90890-06606

Drive shaft housing inspection

  1. Inspect:
    • Drive shaft housing
    Crack/Damage -> Replace.

Drive shaft housing assembly

  1. Install:
    • Needle bearing

Position (a): 5.75 ~ 6.25 mm (0.226 ~ 0.246 in)

Needle bearing attachment: YB-06196/90890-06610
Driver rod: YB-06071/90890-06604
Bearing depth plate: 90890-066032.

  1. Install:
    • Oil seal
    Position (b): 0.25 ~ 0.75 mm (0.010 ~ 0.030 in)

Needle bearing attachment: YB-06195/90890-06633
Driver rod: YB-06071 /90890-06606

Share on social:

Produits associés