SPECIAL TOOLS
A80001-0*
The use of correct special tools recommended by Yamaha will aid the work and enable accurate assembly and tune-up. Improvisations and use of improper tools can cause damage to the equipment.
SPECIAL TOOLS FOR TUNE-UP
| Ref.No. | Tool name | Part number |
|---|---|---|
| 1 | Compression gauge | YU-33223 |
| 2 | Tachometer | YU-8036 |
| 3 | Digital multimeter | YU-33263 |
| 4 | Timing light | YM-33277 |
| 5 | Ignition coil tester | YU-33261 |
| 6 | Dial gauge set | YU-3097 |
| 7 | Test propeller | YB-1621 |
SPECIAL TOOLS FOR ENGINE SERVICE
| Ref.No. | Tool name | Part number |
|---|---|---|
| 1 | Bearing con-rod small end installer | YB-6107 |
| 2 | Flywheel magneto holder assembly | YB-6139 |
| 3 | Universal puller | YB-6117 |
| 4 | Bearing separator | YB-6219 |
SPECIAL TOOLS FOR LOWER UNIT SERVICE
| Ref.No. | Tool name | Part number |
|---|---|---|
| 1 | Bearing housing torquing tool | YB-6075 |
| 2 | Slide hammer puller assembly | YB-6096 |
| 3 | Pinion nut torquing tool | YB-6079 |
| 4 | Bearing separator | YB-6219 |
| 5 | Attachment | YB-6082 |
| 6 | Wrench.Pinion nut | YB-6078 |
| 7 | Rod driver (Large) Rod driver (Small) |
YB-6071 YB-6229 |
| 8 | Attachment | YB-6081 |
| 9 | Needle bearing plate | YB-6169 |
| 10 | Driver head | YB-6167 |
| 11 | Driver head | YB-6085 |
| 12 | Pinion gear shiming tool | YB-34232 |
| 13 | Attachment | YB-6168 |
| 14 | Magnetic plate | YB-7003 |
| 15 | Backlash indicatorrod | YB-6265 |
| 16 | Dial gauge stand | YU-34481 |
| 17 | Bearing housing puller | YB-6234 |
SEALING AGENTS AND LUBRICANTS
| Ref.No. | Part name | Part number |
|---|---|---|
| 1 | Gasket maker | 90790-74001-00 |
| 2 | Marine grease | LUB-GEARS-14-00 |
| 3 | Gear case lubricant | LUB-GEARL-11-00 |
| 4 | Yamaha two cycle outboard oil | ACC-11000-07-01 |
