SPECIAL TOOLS
The use of correct special tools recommended by Yamaha will aid the work and enable accurate assembly and tune-up. Improvisations and use of improper tools can cause damage to the equipment.
SPECIAL TOOLS FOR TUNE-UP
| No. | TOOL NAME | PART NUMBER |
|---|---|---|
| 1 | Compression gauge | YU-33223 |
| 2 | Tachometer | YU-8036 |
| 3 | Digital multimeter | YU-33263 |
| 4 | Timing light | YM-33277 |
| 5 | Ignition coil tester | YU-33261 |
| 6 | Dial gauge set | YU-3097 |
| 7 | Test propeller | YB-1611 |
SPECIAL TOOLS FOR ENGINE SERVICE
| No. | TOOL NAME | PART NUMBER |
|---|---|---|
| 1 | Flywheel magneto holder | YB-6139 |
| 2 | Flywheel magneto puller | YB-6117 |
| 3 | Con-rod small end bearing installer | YB-6106 |
SPECIAL TOOLS FOR LOWER UNIT SERVICE
| No. | TOOL NAME | PART NUMBER |
|---|---|---|
| 1 | Universal bushing and needle bearing remover | YB-29369-1 |
| 2 | Bearing separater | YB-6219 |
| 3 | Bearing housing nut torquing tool (Gland nut wrench) | YB-6048 |
| 4 | Bearing & oil seal tool handle | YB-6071 |
| 5 | Bearing tool attachment (Drive shaft needle bearing) | YB-6063 |
| 6 | Bearing tool attachment (Drive shaft bearing depth) | YB-34473 |
| 7 | Bearing tool attachment (Bearing housing needle bearing) | YB-6112 |
| 8 | Bearing tool attachment (Bearing housing needle bearing) | YB-6111 |
| 9 | Oil seal tool attachment (Bearing housing oil seal) | YB-6269 |
| 10 | Oil seal tool attachment (Water pump oil seal) | YB-6168 |
| 11 | Bearing tool attachment (Forward gear bearing) | YB-6277 |
| 12 | Bearing tool attachment (Forward and reverse gear bearing) | YB-6270 |
| 13 | Bearing tool attachment (Drive shaft taper bearing) | YB-6110 |
| 14 | Pinion nut torquing tools | YB-6079 |
| 15 | Bearing housing puller | YB-6234 |
| 16 | Slide hammer puller | YB-6096 |
| 17 | Magnetic flexible dial base | YU-34481 |
| 18 | Magnet plate | YB-7003 |
| 19 | Backlash indicator rod | YB-6265 |
| 20 | Filler gauge (thickness gauge) | YU-26900-9 |
| 21-1 | Pinion shiming gauge (1/3) | YB-34432-10 |
| 21-2 | Pinion shiming gauge (2/3) | YB-34432-11 |
| 21-3 | Pinion shiming gauge (3/3) | YB-34432-8 |
| 22-1 | Forward gear shiming gauge (1/4) | YB-34446-1 |
| 22-2 | Forward gear shiming gauge (2/4) | YB-34446-3 |
| 22-3 | Forward gear shiming gauge (3/4) | YB-34446-4 |
| 22-4 | Forward gear shiming gauge (4/4) | YB-34446-6 |
| 23 | Reverse gear shiming gauge | YB-34468-4 |
SPECIAL TOOLS FOR POWER TILT SERVICE
| No. | TOOL NAME | PART NUMBER |
|---|---|---|
| 1 | Cylinder end handle | YB-34466 |
| 2 | Oil pressure gauge (Trim and tilt gauge) | YB-6181 |
SEALING AGENTS AND LUBRICANTS
| No. | PART NAME | PART NUMBER |
|---|---|---|
| 1 | Gasket maker | 90790-74001 |
| 2 | Marine grease | LUB-GREAS-14-00 |
| 3 | Power trim/tilt fluid (11 oz) | LUB-PWRTF-11-00 |
| 4 | Gear case lube (11 oz) | LUB-GEARL-11-00 |
| 5 | Yamalube two cycle outboard oil (8 oz) | ACC-11000-07-01 |
