PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Electrical Systems [Fuel Control System] [2008]

Produits associés:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 2003 - 2005 200hp All
Yamaha International 2003 - 2005 225hp All
Yamaha International 2003 - 2005 200hp All
Yamaha Outboard 2003 - 2005 225hp All

Electrical Systems [Fuel Control System] [2008]
LIT-18616-02-76
Yamaha Marine

Fuel control system

(1) ECM

(2) Oil pressure sensor

(3) Intake air temperature sensor

(4) Engine temperature sensor

(5) Main relay

(6) Fuse (5 A)

(7) Fuse(30 A)

(8) Fuse(20 A)

(9) Battery

(10) Pulser coil

(11) Stator coil

(12) Rectifier Regulator

(13) Intake air pressure sensor

(14) Thermoswitch

(15) Throttle position sensor

(16) Shift cut switch

(17) Neutral switch

(18) Idle speed control

(19) High-pressure fuel pump

(20) Low-pressure fuel pump

(21) Fuel pump driver and isolator

(22) Fuel injector

B : Black

Br : Brown

G : Green

L : Blue

O : Orange

P : Pink

R : Red

Y : Yellow

B/W : Black/white

B/Y : Black/yellow

G/B : Green/black

G/R : Green/red

G/W : Green/white

G/Y : Green/yellow

L/R : Blue/red

L/Y : Blue/yellow

O/B : Orange/black

O/R : Orange/red

O/Y : Orange/yellow

P/G : Pink/green

P/W : Pink/white

R/Y : Red/yellow

W/B : White/black

W/G : White/green

W/R : White/red

Y/G : Yellow/green

Checking the low-pressure fuel pump and high-pressure fuel pump

  1. Disconnect the starter relay lead (brown lead) (1) to prevent the engine from starting.

  1. Turn the engine start switch to ON.

  2. Listen for the operating sound of the high-pressure fuel pump (2). Replace if there is no sound.

• After the engine start switch is turned to ON, the high-pressure fuel pump will operate for 5 seconds.
• Check the operation of the low-pressure fuel pump (3) using the “Stationary test” of the Yamaha Diagnostic System.

Share on social:

Produits associés