PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Electrical Systems [Charging System] [2008]

Produits associés:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 2003 - 2005 200hp All
Yamaha International 2003 - 2005 225hp All
Yamaha International 2003 - 2005 200hp All
Yamaha Outboard 2003 - 2005 225hp All

Electrical Systems [Charging System] [2008]
LIT-18616-02-76
Yamaha Marine

Charging system

(1) Stator coil
(2) Rectifier Regulator
(3) Fuse(30 A)
(4) Starting battery
(5) Accessory battery
(6) Fuel pump driver and isolator

B : Black
G : Green
R : Red
W : White
Y : Yellow
G/W : Green/white
R/Y : Red/yellow

Checking the stator coil

  1. Remove the intake silencer and disconnect the stator coil coupler.

  2. Connect the test harness (3 pins) to the stator coil.

  3. Install the intake silencer.

Do not start the engine when the intake silencer is not installed.

  1. Measure the stator coil output peak volt age. Replace the stator coil if below specification.

Digital multimeter: YU-34899-A
Peak voltage adaptor: YU-39991
Test harness (3 pins): YB-06770

Stator coil output peak voltage: Green (G) - Green (G)

r/min Unloaded Unloaded Unloaded
r/min Cranking 1,500 3,500
DC V 10 42 93

Green/white (G/W) - Green/white (G/W)

r/min Unloaded Unloaded Unloaded
r/min Cranking 1,500 3,500
DC V 9.0 34 78

Stator coil resistance (use as reference): Green (G) - Green (G)

0.28-0.42 Ω at 20 °C (68 °F)
0.24-0.36 Ω at 20 °C (68 °F)

Green/white (G/W) - Green/white (G/W)

0.24-0.36 Ω at 20 °C (68 °F)
0.20-0.31 Ω at 20 °C (68 °F)

Checking the Rectifier Regulator

  1. Remove the intake silencer and disconnect the Rectifier Regulator coupler.
  2. Connect the test harness (2 pins) to the Rectifier Regulator.
  3. Install the intake silencer.

Do not start the engine when the intake silencer is not installed.

  1. Measure the Rectifier Regulator output peak voltage. If below specification, measure the stator coil output peak voltage. Replace the Rectifier Regulator if the out put peak voltage of the stator coil is above specification.

Disconnect the output lead couplers (blue) of the Rectifier Regulator when measuring the output peak voltage.

Digital multimeter: YU-34899-A
Peak voltage adaptor: YU-39991
Test harness (2 pins): YB-06787

Rectifier Regulator output peak voltage:
Red (R) - Black (B)
Red/yellow (R/Y) - Black (B)

r/min Unloaded Unloaded
r/min 1,500 3,500
DC V 13 13
Share on social:

Produits associés