PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Electrical System [Power Trim And Tilt (Ptt) Control System] [1998]

Produits associés:

Applicable Models

Model group Year Model Serial
Yamaha International 1998 25hp All
Yamaha Outboard 1998 25hp All

Electrical System [Power Trim And Tilt (Ptt) Control System] [1998]
LIT-18616-01-77
Yamaha Marine

POWER TRIM AND TILT (PTT) CONTROL SYSTEM (ET)

(1) Battery
(2) Fuse
(3) Trailer switch
(4) Connector
(5) PTT relay
(6) PTT motor
B : Black
G : Green
L : Blue
Lg : Light green
R : Red
Sb : Sky blue

POWER TRIM AND TILT (PTT) CONTROL SYSTEM (EHT)

(1) Battery
(2) Fuse
(3) Trailer switch
(4) PTT relay
(5) PTT motor
B : Black
G : Green
L : Blue
Lg : Light green
R : Red
Sb : Sky blue

FUSE

Refer to "STARTING SYSTEM".

BATTERY

Refer to "GENERAL" in chapter 3.

TRAILER SWITCH

  1. Check:
    • Continuity
    No continuity -> Replace.

PTT RELAY

  1. Check:
    • Continuity
    Out of specification -> Replace.
PTT relay continuity: PTT relay continuity:
Sky blue (Sb) - Black (B)
Light green (Lg) - Black (B)
Continuity
Terminal (1) - Terminal (-)
Terminal (2)-Terminal (-)
Continuity
Terminal (1) - Terminal (+)
Terminal (2) -Terminal (+)
No continuity

  1. Check:
    • Relay operation
    Does not function -> Replace.

Checking steps:
• Connect the tester between the termi nals of the PTT relay.
• Connect a 12 V battery.

Light green (Lg) lead -> Positive terminal
Black (B) lead -> Negative terminal

• Check that there is continuity between the PTT relay terminals.
• Connect the tester between the terminals of the PTT relay.
• Connect a 12 V battery.

Sky blue (Sb) lead -> Positive terminal
Black (B) lead -> Negative terminal

• Check that there is continuity between the PTT relay terminals.

PTT MOTOR

Refer to "PTT MOTOR DISASSEMBLY" in chapter 7.

Share on social:

Produits associés