PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Bracket Unit [Tilt Cylinder, Pump Housing And Motor] [1998]

Produits associés:

Applicable Models

Model group Year Model Serial
Yamaha International 1998 25hp All
Yamaha Outboard 1998 25hp All

Bracket Unit [Tilt Cylinder, Pump Housing And Motor] [1998]
LIT-18616-01-77
Yamaha Marine

EXPLODED DIAGRAM

REMOVAL AND INSTALLATION CHART

Step Procedure/Part name Q'ty Service points
TILT CYLINDER, PUMP HOUSING, AND MOTOR REMOVAL Follow the left "Step" for removal.
1 Reservoir plug 1
2 O-ring 1 8.8x 1.9 mm
3 PTT motor 1
4 Connector shaft 1
5 Tilt cylinder 1
6 Ball 2
7 Plunger 2
8 Spring 2

EXPLODED DIAGRAM

Step Procedure/Part name Q'ty Service points
9 O-ring 4 5.5 x 1.5 mm
10 O-ring 3 10.7 x 1.5 mm
11 Screen 1

Reverse the removal steps for installation

SERVICE POINTS

• To prevent the hydraulic fluid from spurting out due to internal pressure, the outboard should be kept fully tilted up (the tilt rod at full length).
• After removing the tilt motor or oil reservoir, do not push the tilt rod down. This may cause hydraulic fluid to spurt out from the port.

Do not wipe hydraulic system components with rags, paper, tissues, or the like, as fibers from such material will cause malfunctions if they enter the system.

Removal of the tilt cylinder is not necessary for cylinder repair.

Share on social:

Produits associés