PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Bracket Unit [Swivel Bracket And Steering Arm] [2004]

Produits associés:

Applicable Models

Model group Year Model Serial
Yamaha International 2004 60hp All
Yamaha Outboard 2004 60hp All

Bracket Unit [Swivel Bracket And Steering Arm] [2004]
LIT-18616-FT-60
Yamaha Marine

Swivel bracket and steering arm

No. Part name Q’ty Remarks Tightening torques Tightening torques Tightening torques Tightening torques
Stage N-m kgf-m ft-lb
1 Steering arm 1
2 Washer 1
3 Bushing 1
4 O-ring 2 Not reusable
5 Bushing 2
6 Swivel bracket 1
7 Bushing 1
8 Port tilt stop lever 1
9 Circlip 1
10 Steering yoke 1
11 Bushing 1
12 Bushing 1
13 Tilt stop lever joint 1
14 Spring holder 1
15 Bolt 1 M6 x 10 mm
16 Spring 1
17 Bushing 1
18 Pin 2
19 Bushing 1
20 Starboard tilt stop lever 1

Removing the steering arm

  1. Remove the circlip (1).

  2. Remove the steering yoke (2) by striking it with a plastic hammer.


S62Y7380

  1. Remove the steering arm from the swivel bracket by pulling the arm off the bracket.

Installing the steering arm

  1. Install the washer (1), bushing (2) O-ring (3) and bushing (4)onto the steering arm (5).

  2. Place the swivel bracket (6)in an upright position, and then install the steering arm onto the swivel bracket.


S62Y7390

  1. Install the bushing(7), O-ring (8), and bushing (9) onto the swivel bracket.


S62Y7400

  1. Install the steering arm( 5) into the steering yoke(10) by aligning the center (a) of the yoke with the center(b)of the steering arm.

5.Install the circlip (11).


S62Y7410

  1. Inject grease into the grease nipple until grease comes out from both the upper and lower bushings (c).


S62Y7420

Share on social:

Produits associés