PRÉPAREZ-VOUS POUR L'HIVER : de 10 % à 50 % de réduction sur toutes les pièces d'origine !

Sauf interdiction par le fabricant. N'inclut pas les produits de rechange ou de marque Crowley Marine. Prix indiqué.

Nos entrepôts sont fermés le jeudi 26 et le vendredi 27 novembre. Joyeuse fête de Thanksgiving des États-Unis!

Recherche Plus d'un 1 million de pièces d'équipementier
Facile à utiliser  schémas des pièces Meilleur prix  garanti Assistance en directexperte   Plus de 50 ans  au service des plaisanciers Grand choix de pièces OEM  -  de 1950 à 2026 La plupart des pièces en stock  -  Exécution le jour même
Pièces en stock- Exécution le même jour

Bracket Unit [Ptt Motor] [1996]

Produits associés:

Applicable Models

Model group Year Model Serial
Yamaha Outboard 1996 150hp All
Yamaha Outboard 1996 175hp All
Yamaha Outboard 1996 200hp All
Yamaha Outboard 1996 225hp All
Yamaha Outboard 1996 250hp All

Bracket Unit [Ptt Motor] [1996]
LIT-18616-01-41
Yamaha Marine

EXPLODED DIAGRAM

REMOVAL AND INSTALLATION CHART

Step Procedure/Part name Q'ty Service points
PTT MOTOR DISASSEMBLY Follow the left "Step" for removal.
Refer to "RESERVOIR TANK AND MOTOR REMOVAL" section.
1 Through bolt 2
2 Commutator end cap 1
3 Brush holder assembly 2
4 Stator 1
5 Armature 1
6 Commutator end cap 1
7 Oil seal 1
8 Bearing 2
Reverse the removal steps for installation.

SERVICE POINTS

Motor inspection

  1. Inspect:
    • Commutator
    Dirty -> Clean with #600 abrasive paper.

  2. Inspect:
    • Segment undercut Clog -> Clean.

Remove all particles of metal with com pressed air.

  1. Measure:
    • Commutator diameter (a)
    Out of specification -> Replace.

Commutator diameter limit:
6G510: 27 mm (1.06 in)
6E503: 21 mm (0.83 in)

  1. Inspect:
    • Armature coil continuity
    Out of specification -> Replace.
Armature coil continuity: Armature coil continuity:
Commutator segments Continuity
Segment - laminations Discontinuity
Segment - shaft Discontinuity
  1. Measure:
    • Brush length (a)
    Out of specification -> Replace.

Brush length limit:
6G510: 7.5 mm (0.30 in)
6E503: 4.8 mm (0.19 in)

  1. Inspect:
    • End cap
    Crack/Damage-> Replace.

  2. Inspect:
    • Oil seal
    Wear/Damage -> Replace.

Motor assembly

  1. Check:
    • Motor operation
    Out of specification -> Repair.
Motor operation: Motor operation:
Blue (+), Green (-) Clockwise
Green (+), Blue H Counterclockwise
Share on social:

Produits associés